Jump to content
SAU Community

Recommended Posts

Got this complete rear cradle from a Series 2 Rs4s Stagea.

What you see is what you get (not including the tailshaft and motor behind it!)

$600, need it gone from my driveway.

PICK UP Preferred however can ship. Due to the size it will probably be pricey for shipping but hit me up if you want a quote.

IMG_0694_zps09fb3cba.jpg

IMG_0693_zpse320200f.jpg

IMG_0692_zpsec281a58.jpg

IMG_0690_zps998bd91c.jpg

  • 1 month later...

Guys this is a bargain :) gtr axles and unis , "much stronger", lsd center and 50mm shorter so you can run 10 inch wide rims on the back :) if you plan on making over 300 and use it you will need one of these one day trust me

Guys this is a bargain :) gtr axles and unis , "much stronger", lsd center and 50mm shorter so you can run 10 inch wide rims on the back :) if you plan on making over 300 and use it you will need one of these one day trust me

  • Like 1

Guys this is a bargain :) gtr axles and unis , "much stronger", lsd center and 50mm shorter so you can run 10 inch wide rims on the back :) if you plan on making over 300 and use it you will need one of these one day trust me

cheers mate, yea it's cheap because I just have a lot of parts and would rather the space

get on it people!

  • 1 month later...
  • 1 month later...

Hey champ Im not sure if you are willing to seperate but I desperately need two within spec rear rotors ( over the 16mm minimum thickness ) if these ones are over that would you be willing to sell them seperate ?

Hey champ Im not sure if you are willing to seperate but I desperately need two within spec rear rotors ( over the 16mm minimum thickness ) if these ones are over that would you be willing to sell them seperate ?

yea can do for the right price, i'll have to check the thickness tonight though

  • 1 month later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
    • Well, I was using ECUTalk software if that helps? Not sure if that only can see engine codes? Is there any other software I could give a try? Or any way I can get a blink code?
    • I never touched it, it should have. I'll try to give it an adjust. With IACV plugged in, it idles at around 1120RPM on average. Max 1200 RPM, Minimum 1025RPM before it starts dropping right before stalling. Took the data from the Nistune logs.
    • Thats what im trying to solve bro  no one with aem tuner experience would advice  much appreciate 
×
×
  • Create New...