Jump to content
SAU Community

Recommended Posts

Hi All,
Selling R32 GTR Turbos with Steel wheels + 2.5" Dump Pipes, All factory fit obviously.


These turbos were rebuilt 15000kms ago by the previous owner and they have steel wheels in them now.
Im selling them because im upgrading, Otherwise there is nothing at all wrong with them.
i was running 234kw on 16psi with standard ecu.

Should be no reason to get in excess of 270kw with a ecu + port matching the manifolds that i'll give you.

I've run constant 11 second pass's with these turbos and they are great (vid in my sig).

I would like $450 For the lot, which is a fair price i think considering ceramics go for like 350 by themselves and your getting steels + dumps.

Blacktown Area for pick up, Wont be freighting unless your prepared to pay for freight.

1379331_10152614286279897_2069725235_nLa

548418_10152614286594897_1126138016_nLar

1379634_10152614286929897_630617051_nLar

548429_10152614286134897_770066676_nLarg

9161_10152614286059897_213176072_nLarge_

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just a thought, was that car and auto at any point of its life? If so, maybe whoever bridged the inhibitor switch/circuit did a not so good job.
    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
×
×
  • Create New...