Jump to content
SAU Community

Recommended Posts

I was told yesterday it was running really rich an can't change that till it's tuned but better than lean ?

But they were talking to a Nissan moron ,now I know how other people have felt when I'm going on at a mile a minute on other topics.

Larger turbo on stock ECU will run rich

To protect the engine.

No chance of getting 280kw with just a computer.

As zebra said, chances are that it's got stock injectors, fuel pump and AFM because its the stock computer.

So max with those parts and a tune is around 210-220 but with a larger turbo its going to be a laggy 210-220 I would guess.

So start planning what you want and we can help try come up with what you will need.

The mechanic I seen yesterday said he'd have it running 280kw in a week, but what we spoke about the haltech platinum piggyback I'd have a safe 220-230 but your right about injectors , regulator and pump.

Are I tank fuel pumps a hassle to install?

I'm about to run an injector cleaner through a full tank but still have to find out about the fuel system

Thx

Have a good look at you injectors and compare with photos on google images.

If your keen, take out the fuel pump and do the same.

If you spend a bit of time reading : http://www.skylinesaustralia.com/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/

You will see what is actually needed to make power, and what does nothing.

What i learned is if you have a bigger turbo and want more power, you need more fuel. The standard fuel system only has enough for a slightly bigger turbo, and small power gain.

And you need a computer to run it of course. A Nistune is suitable for anything thats not making heaps of power. ( for rb 25s i dont know exactly how much )

Almost anything else you do to the motor wont give more power, like wanky bov's etc. But things like an upgraded cooling system can keep it in good nik longer.

Dont forget the cheap effective things like exhaust and intake, though you may have most of that done already.

Personally id make it run nice with the turbo you have, and concentrate on handling.

Theres a lot of bits and pieces to make it handle good. It can eat up a lot of cash.

I couldnt use all my 180kw because my diff was stuffed, no point having power you cant use.

Ps: im jealous of your wastegate actuator, thats nice and simple, reliable and adjustable.

Edited by D.I.Y. Mik

The mechanic I seen yesterday said he'd have it running 280kw in a week, but what we spoke about the haltech platinum piggyback I'd have a safe 220-230 but your right about injectors , regulator and pump.

Are I tank fuel pumps a hassle to install?

fuel regulator usually isnt needed as upgraded injectors dont need more pressure.

unless your going for huge power

How can the mechanic say 280kw without knowing what its got.

Not being a flamin mongrel.

Trying to help.

Haltech piggyback is the most ridiculous thing ive heard.

This isn't 1999 anymore.

Nistune will do everything you need for half the price and as a bonus will actually work.

Car wouldn't run with bigger injectors.

If they are purple they are stock.

Ok.

So what you want is.

And this depends on budget too.

Nistune or a powerfc.

550cc or larger injectors.

Larger fuel pump. Walbro or something similar

Z32 MAF

Metal intake pipe

Then better than stock clutch (im partial to os giken)

Then tune by someone who knows what they are doing...once again my preference to take it to yavus at unigroup engineering in sydney (I wont ever take my car anywhere in canberra, but im a fussy prick) others are happy with a couple of the locals.

There arent many highflows that will do 280rwkws on 98 so expect 240-250 at the most.

Now you have a quick car that needs to stop and steer better. So factor in good suspension stuff. A good diff Centre and work on the brakes. New rotors and good pads are enough for most.

Ok.

So what you want is.

And this depends on budget too.

Nistune or a powerfc.

550cc or larger injectors.

Larger fuel pump. Walbro or something similar

Z32 MAF

Metal intake pipe

Then better than stock clutch (im partial to os giken)

Then tune by someone who knows what they are doing...once again my preference to take it to yavus at unigroup engineering in sydney (I wont ever take my car anywhere in canberra, but im a fussy prick) others are happy with a couple of the locals.

There arent many highflows that will do 280rwkws on 98 so expect 240-250 at the most.

:yes: exactly

Just found out the guy I brought the skyline off in apr cashed in the rego 2 days after I did the revs check an I've got to re rego it , have to either replace the steering rack or stop the leak.

3 new tyres and kill 6Db, also raise the adjustable coil overs they do hight but can I do it or do I have to get pedders or such too, same principle as a motorbike shock I think but I want the adjustment to be exact.

Also thought about adjusting the boost with the adjustable rod but don't know what distance to boost it will make.

That's where I'm at.

Also looking for a maf befote tune.

Cheers

Oh also found out they wound back the tacho it's got about 300000 not 169000 as it read , is anyone honest anymore

But compression check an engine check is healthy so don't know what to think

I will never do biz in vic again. That's 3 times now I've been screwed down there .

Oh also found out they wound back the tacho it's got about 300000 not 169000 as it read , is anyone honest anymore

But compression check an engine check is healthy so don't know what to think

I will never do biz in vic again. That's 3 times now I've been screwed down there .

Be careful not only in Vic but every other state. Normalllllly - SAU people are fair honest - as we are a little tight knit community. I purchased Rosie from vic (SAU seller) and it was quite a good deal. Nothing wrong with it and all in good nick - all I could ask for was a little less lazier seller :P

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...