Jump to content
SAU Community

Props To Justjap

ecl

By ecl,
in R35 GTR

 Share

Recommended Posts

ecl Mentor

ecl

Posted
Posted

For those that read through my previous transmission issue thread. Here is part 2.

So after driving around for about 1.5 months, one morning, went to start the GTR and bam, T/M tests failed, limp mode, odd gears. Plugged in the cobb and had a pressure sensor failure.

There were several reasons why I didn't go back to the workshop where I had the original work done but I'll leave that out for now. With that said, gave Just Jap a call and told the guy on the phone the cobb code and got a fixed quote for labour and parts. Dropped the car off, came back from overseas and picked the car up with the gearbox all fixed and the bill 100% as quoted.

If you are in Sydney, I highly recommend these guys. Very reasonable pricing and no BS.

Link to comment
https://www.sau.com.au/forums/topic/433391-props-to-justjap/
Share on other sites
  • 4 weeks later...
philsutty Apprentice

philsutty

Posted
Posted

I've also had a trans sensor issue recently and ended up getting a built box from Justjap as I have plans for future mods down the track. I really can't talk highly enough of the service I received. It was bloody fantastic.

I emailed them on a Sunday and to my surprise got a reply. After many emails through the day and also into Sunday evening, I bit the bullet and went with a box they had built for Targa Tassie. Trans was shipped to Brisbane Monday and the car was ready yesterday.

I haven't had any dealing with Justjap in the past - and as mentioned I'm in Brisbane - but I will certainly be using them again in the future.

Also big thanks to CMR at Capalaba for their wonderful service.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...