Jump to content
SAU Community

1999 Vspec With Full Rebuild, Z-Tune Kit, All Paperwork And Photos.

CHO50N

By CHO50N,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

CHO50N Proficient

CHO50N

Posted
Posted (edited)

My Baby is for sale, I have just finished building this car but an opportunity has come up to further invest in housing so im seeing if anyone is interested in the GTR. I built this car for myself and have all documents / pictures to back up the build.

The engine has been built by Team Karam and has only today come back from its 1000km check up. Tuned by JEM making just over 300awkw on pump fuel. The car was built to be used hard, that’s why its sitting at 300kw and can be punished all day every day.

I am still not fully convinced to sell but its worth a try

Some parts are still to be fitted (front diffuser removed for easier access during built) this to has been fully restored.

$50,000

Please call for any other questions

0400 841 142

Engine from top:
Tomei spec B cams
Tomei titanium dual valve springs
Custom oil restrictor
Tomei cam gears
Clear cam cover
Gates timing belt
Tomei billet gear oil pump
Nismo water pump
Silicone hoses
Custom catch can
Greddy plenum
-5 turbos
850cc injectors
Saard fuel reg
Tomei metal head gasket
Tomei exhaust gaskets
Tomei extreme turbo manifolds
CP hicomp pistons
Eagle rods
ACL bearings
ARP studs
New crank
Tomei sump baffle
Boost controller
Power FC
Z32 air flow metres
Turbo timer

Apexi filters

Air diversion plate

Nismo twin plate clutch

Suspension
HKS fully adjustable coilovers

Exhaust
HKS super dragger catback
Tomei split dumps
Tomei front pipe

Body:
Z tune side skirts
Z tune rear pods
Z tune Guards
Jun carbon spoiler stands
Nismo blinkers

Factory fog lights

post-23484-0-07800300-1382319783_thumb.jpg

post-23484-0-31800400-1382319796_thumb.jpg

post-23484-0-90507300-1382319804_thumb.jpg

post-23484-0-68612100-1382319819_thumb.jpg

post-23484-0-66835600-1382319828_thumb.jpg

post-23484-0-90815700-1382319838_thumb.jpg

post-23484-0-73279800-1382319848_thumb.jpg

post-23484-0-28312500-1382319859_thumb.jpg

post-23484-0-79605000-1382319869_thumb.jpg

post-23484-0-21502900-1382319878_thumb.jpg

post-23484-0-21502900-1382319878_thumb.jpg

post-23484-0-84192800-1382319885_thumb.jpg

post-23484-0-16933100-1382319894_thumb.jpg

post-23484-0-98821100-1382319902_thumb.jpg

post-23484-0-42205000-1382319938_thumb.jpg

post-23484-0-25154500-1382320122_thumb.jpg

post-23484-0-06126800-1382320419_thumb.jpg

post-23484-0-63668500-1382320386_thumb.jpg

post-23484-0-54072700-1382320160_thumb.jpg

post-23484-0-25218400-1382319978_thumb.jpg

Edited by CHO50N
Wongy Proficient

Wongy

Posted
Posted

How many keys do you have that will come with the car? Just trying to help with sale :) cuz mine only came with one and trying to get another one matched to the car, apparently its harder when the ECU has been changed. GLWS :)

Iron Mike Proficient

Iron Mike

Posted
Posted

What's with all these muppets offering rubbish money? If you want a bucket go to Paramatta and I'm sure a few places there can sort you out with something for your poo change

CHO50N Proficient

CHO50N

Posted
  • Author
Posted

Hahahah Iron Mike I sometimes love it. These are the guys that end up buying the 200,000km GTR thats had a speedo adjustment. Unknown history, are totally standard and end up blowing up!! They pay $40k, car blows up and ends up owing them $55k+ and its still nothing on what I have for sale.

  • Like 1
Jack0R33 Collaborator

Jack0R33

Posted
Posted

Well i guess at the end of the day, if you hand your car over for much less than it is worth, it's more than likely going to be poorly looked after and not maintained. So do not settle for "poo" offers, just advertise more. GTRs need good homes!

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Hendasto
      Lets play a game - What is causing my oil consumption?

      By Hendasto · Posted

      Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • Hendasto
      Are RBs worth building reliability wise

      By Hendasto · Posted

      At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • MBS206
      New kid on the block

      By MBS206 · Posted

      https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...