Jump to content
SAU Community

Recommended Posts

Welcome.

Assuming you have R33 turbo boxes it seems strange you are blowing them chasing 'only' 330RWKW. I say 'only' as that is still a lot of power for a street car, just no where near the limit of those boxes.

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7079981
Share on other sites

Woops sorry, I assumed you had manual. Like Luke said swap to manual, cheaper than a built auto and more fun for a street car. Also manual is a plus if you decide to sell it in the future.

Lol, I have 2 of them one the exact same with minimal mods running manual, would be happy to make my modded one less streetable as it's not my daily and i'm sus on the 2nd gear set in the manual boxes from experience.

How strong are the manual box (clutch choice also dependant of course) and what sort of power figures have people been able to put through them?

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7087704
Share on other sites

swap to manual.

or th400, or power glide.

Cheers, will do some more researching. Preference is always manual but it's still just as fun regardless what transmission is in it.

Just want some reliability without an 8k price tag.

Can pickup complete manual conversion for $1500 with good box tomorrow... But does that mean i'm going to be doing a clutch everytime I give it a bit of what for?

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7087710
Share on other sites

Lol, I have 2 of them one the exact same with minimal mods running manual, would be happy to make my modded one less streetable as it's not my daily and i'm sus on the 2nd gear set in the manual boxes from experience.

How strong are the manual box (clutch choice also dependant of course) and what sort of power figures have people been able to put through them?

Here is a quote from the CT forum. There are a bunch of guys on their using the 33 boxes for drag racing.

"i have a wrecker spec box with a short shifter i only put oil in it because it was empty in the frame of mine its cheap lets break it then think about something different it did 4 years on the road running in the 11s @ 130ish mph at the track then another 2 years of drag only running 10s @ high 130mph with full slicks and 6800rpm two step launch and still all good. It has been through 2 blown clutches, 1 smashed centre bearing, 3 broken uni's, 1 pretzal tailshaft, 2 folded lower control arms and then 2 broken axles. I pulled it down thinking i should look at the damage NONE wasnt even fillings in the oil THEY ARE TUFF "

Look at getting a Jim Berry clutch if you are worried about it failing. Twin plate should be under $1500. He will talk you through it and let you know the best clutch for your application.

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7087746
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...