Jump to content
SAU Community

Recommended Posts

hi guys, no longer have my Stagea, so no need for these parts.

Genuine Sard 650cc injectors to suit rb25 neo incl longer rail bolts and spacers so they are direct fit. $600

Brand new in box genuine Nissan z32 AFM and new plug. Paid $350. Selling $280

rb25det PermaSeal MLS exhaust gasket - brand new Paid $80 Selling $40

Stainless Low mount manifold - some damage, was bought that way. $50

also have a GT35R compressor housing txt me about it if interested

also might consider parting with my genuine RE Amemiya 100mm thick FMIC im pretty sure its to suit S6 Rx7, but it could be piped up to anything.

txt me on 0408678744. i don't have my phone on me at work, i only check it on my breaks, please txt and i will reply by txt or will call you back.

will post Australia wide, except the manifold, unless your prepared for some hefty postage costs.

will post pics this afternoon.

May consider swapping for other universal parts.. turbo, gauges, boost controllers.. etc as im building a S5 rx7 atm.

Edited by OMY31T
  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...