Rb25 Into A R32 Help!

[Reaper576]

Hi guys, I was hoping you might be able to help me out. I have just put an Rb25 into my R32 gtst and I'm having problems getting it to start

I have checked to make sure that I am getting spark and that I am getting fuel into the engine but it doesnt even try to start,

I know that I am getting fuel into the engine becuase I had to have my injectors cleaned and have had them running out side the enigne

I have also had my coil packs out and eathed to check for spark (It has a really good spark)

Any help would be aprreciated as I am completly out of ideas

[stÖrmy]

when you say it doesn't even try to start do you mean the starter motor itself doesn't move ? if thats the case then you need to check the wiring going to it, when i put my Rb25 into my silvia i re-done the alternator and start wiring, the starter should have the signal wire going from the IGN wire to the flat pin plug on the starter, and then just put a positive wire from the battery to the big bolt on the starter, im pretty sure thats how mine is.

if the starter does crank but it doesn't actually fire on then check your CAS is plugged in as well the ECU and AFM, sounds simple but i forgot about these the first time i tried to turn mine on