Jump to content
SAU Community

Recommended Posts

Hey guys.

So my car is not running at the moment. I was driving down to mall and all of a sudden indicators stopped working and when I got off the car , it wont lock the car (with the remote) and tried starting the car and that didnt happen as well(it just cranks up and dies). Called RACQ guy and he told me the immobiliser is playing up, he towed my car to my place and now its just sitting there and staring at me. I did change the battrey in the remote and that didnt help as well. So I've no clue where to go first, nissan dealer or auto electricians or Locksmiths. Wondering if any of you guys can help?

Cheers

Sam

Link to comment
https://www.sau.com.au/forums/topic/438254-2004-skyline-350gt-wont-start/
Share on other sites

Can you swap the battery in the car? Check the terminals for corrosion or cracking, and check the main fuse also. Has it been raining there lately?

Surely the RACQ guy would have checked these things though... instead of dumping your car in your drive. :/

If the battery checks out fine, you may have a faulty crank sensor, probably worth jacking the car up and checking the plug and wires going to it, just in case they are damaged.

its such a surprise that my cars all fine now, sat there for two nights and now its all good like before, went to the autoelctrician to have a chat about it and he told me he cant help me until he sees any issues on my car.. weird..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...