Jump to content
SAU Community

Forged 5Sfe Sw20 Mr2

sx.

By sx.,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

sx. Apprentice

sx.

Posted
Posted

Model: Mr2 sw20
Year: 91 but rego'd as a 98
Kms: 153 xxx but only a few thou on new engine
Location Perth WA
Contact: 0452495225

Modifications

Engine; (mod permits for engine and turbo)

5sfe bottom end (bored & Torque plated
Pauter conrod
J E pistons
3sgte Ported and polished head
custom head gasket
WTF auto dump pipe and wastegate pipe
WTF auto intercooler pipe work
WTF auto exhaust manifold $1400
magna flow 3' compact high flow cat
NGK spark plugs
HKS gam pully
Turbosmart 50mm External wastegate
Garret Gt3071
PWR W2A intercooler
Craig Davis water pump
external oil cooler
Haltec ECU
Pod filter
that's all I can think of for now

Fuel
HKS fuel rail + 750cc or 850cc injectors ( have to double check)
Walbro 255lph fuel pump
Turbosmart fuel regulator
remote oil filter

Body:
Resprayed
18inch jap rims 215/35 front 245/40 rear (passed pits with heaps of rubber left)
Bodykit
lowered
cusco strut brase (not fitted)
Brad new alarm and immobiliser
HUD speedo

also has new seat belts, steering rack boot, engine mount, new door cards, new windscreen and fender moulds, targe seals, rear sway bar, etc etc etc

have over 15k in receipts from WTF auto 7.7K from Ashford racings and this does not include body work, rims targe seals etc. have 3 files full of receipts and not for services like some sellers.

car passed pits exactly how it sits now except for the HUD speedo

Price 13,500 firm or trades plus cash to the value of 15k (keen on a Kawasaki ninja 250r)
this this extremely cheap for that the car has , Tristan at WTF auto has said it would cost well over 30k to replicate this car

post-43567-0-55462700-1397540235_thumb.jpg

post-43567-0-83643500-1397541565_thumb.jpg

post-43567-0-27124200-1397541578_thumb.jpg

post-43567-0-85340100-1397541602_thumb.jpg

Link to comment
Share on other sites
  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • r32-25t
      Bolt dress up kit

      By r32-25t · Posted

      They sell them in Malaysia for about $4
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...