Jump to content
SAU Community

Recommended Posts

Hello all,

my 1994 R32 GTR VSpec2 came with a bizarre head unit which was silver/bronze in colour (not matching the rest of the interior) and which features a 'micro disk player'

Upon removal, it had a Nissan sticker on it (no other brand name visible)

Has anyone ever come across a unit like this and was it an original equipment option ??

Just wondering

Cheers

The Baron

If it's the one I think it should be a cd and md unit in a DIN chassis . Common in the cube.

Yup - that's it.......

Do you know whether it was ever 'stock' on an R32 ??

Cheers

The Baron

Nope. Think about the era. MD wasn't around until 2001. That's were I commonly find them.

Ah - ofcourse.......sometimes I forget how old the R32 is ;-)

Thanks for your help Chris :-)

Cheers

Andreas aka The Baron

  • 2 weeks later...

I had a Kenwood CD/MD unit fitted to my R33 when I bought it in 2008, it was double din, had a tilt-out front panel that powered out to the preferred angle when switched on and tilted down to allow insertion of cd/md. It also had a myriad of lighting modes and dancing equaliser bars, not a bad unit and I would have kept it if I could have played mp3's.

Later upgraded to a single DIN Sony CD unit with aux socket, mp3 and bluetooth, overall much better and most of the time I just play music via the bluetooth. I also fitted an 4 channel amp and better speakers.

The Kendwood was cool though, I ended up selling on E-bay to a guy who wanted the JDM look.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...