Jump to content
SAU Community

Recommended Posts

Hey Guys

I have attached a pic of the MFD in my R34 GTR.

As you will see there are 2 issues with it the first being the screen cracking look which I know I can easily fix with a new film.

The other concern is in the bottom left of the plastic surround there are some cracks.

So my question does anyone know how you could go about fixing this issue?

And if its not able to be fixed where and roughly what cost would a new MFD be to purchase for replacement?

Any feedback would be great.

Thanks

post-134733-0-10378600-1400663198_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/443454-mfd-replacement-or-repair-ideas/
Share on other sites

I will have a full housing and screen available shortly. Do you know what screen you have? Mine is sharp.

I honestly have no idea! How do I find this out?

What condition is yours in and what price are you after?

Cheers

Pull it out, pop the top off, note the ribbon cable to the screen. If you have one it's sharp, if you have two it's toshiba .

I am building something custom around one of these and needed to buy one for the boards.

Hey Guys

I have attached a pic of the MFD in my R34 GTR.

As you will see there are 2 issues with it the first being the screen cracking look which I know I can easily fix with a new film.

The other concern is in the bottom left of the plastic surround there are some cracks.

So my question does anyone know how you could go about fixing this issue?

And if its not able to be fixed where and roughly what cost would a new MFD be to purchase for replacement?

Any feedback would be great.

Thanks

The crack on the bottom left happened to me as well, I'm fairly sure it's from the screw on that corner being done up too tight, and all the bumps on the road must have jolted the MFD and cracked the surround....

So bought a new MFD and left that screw out.

  • 3 weeks later...

I honestly have no idea! How do I find this out?

What condition is yours in and what price are you after?

Cheers

Missed a point on this.

Mine will be for sale in 5-6 months once I duplicate the controls. Until then I need it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...