Jump to content
SAU Community

Recommended Posts

Hi guys seeing if anyone would be interested in swapping my gs300 for a r32 or cefiro would really like to have a turbo RB again...

specs:

retailed over 90000 when it first came out

hard to find in black

207xxxkms

2JZGE engine(n/a toyota supra engine)

3.0 6 cylinder

20'advantis or 18" genuine 3piece ROHs with stretched Tyres.

5 speed auto transmission

traction control system

168kw(225bhp) stock

rear wheel drive

sun roof

auto adjust HID headlights

halo headlights

raybrig yellow fog lights

automatic headlights washer

rear parking sensors

full electric with adjustable lumbar support and memory seats

full tanned leather

dual climate control

6 airbags

electric steering

electric side mirrors

cruise control

owners manual

valet kit

full set emergency kit with warning triangle

just had major service

LED tail lights

adjustable coilover suspension

OEMlexus gear knob

accident and damage free

great car to drive

Can be contacted on 0449 254 934 txt only as too busy for phone calls....post-92632-14010945489712_thumb.jpgpost-92632-14010945799004_thumb.jpgpost-92632-14010946123631_thumb.jpgpost-92632-14010947204265_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/443660-gs300-swap-for-r32/
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...