Jump to content
SAU Community

R33 Parts! Rb25/30 Engine, Stinger 4424 Ecu, 3" Catback, Front Mount Kit, Greddy Timing Belt Kit, Full Rb25Det Oem Gasket Kit + More


Recommended Posts

Yo, I've got a bunch of parts here taking up space so they're all up for sale. Located in Sydney for pickup or I can post most things

PM me or reply here if you're keen on anything

1. Rb25/30 engine (RB25DET twin cam head + RB30 block) removed from a R33 Skyline Gts-t. The engine was running great upon removal and would make a perfect base for a powerful drift or whatever. Compression tested at approx 135-140 PSI on all cylinders
The engine will be sold as a long motor (No turbo/exh manifold, injectors/rail, coilpacks, pumps/accessories or wiring loom) but everything else is there. VCT has been retained for this setup

Included with the engine is the custom made front facing plenum, the oil filter relocation kit + oil cooler (with braided hoses and Earls fittings), and a set of custom made FMIC piping to suit the front facing plenum. The FMIC piping has Blitz BOV/flange welded in and is also included
The engine has a metal head gasket but I have not opened it up to see if any further parts have been added (rods, pistons, etc) Most people upgrade these parts while the engine is apart but I don't know for sure

$1600 Ono

Pics of the engine before it was pulled from the car + included parts:

post-35556-0-70832200-1409498874_thumb.jpg post-35556-0-52272200-1409498469_thumb.jpg post-35556-0-13897100-1409498546_thumb.jpg post-35556-0-68242400-1409498556_thumb.jpg

2. EMS Stinger 4424 v4 ECU + wiring loom + data cable + boost solenoid & switch. These removed from a different R33 but can be wired into many different vehicles. Good working condition - $650 ono

post-35556-0-10303800-1409498533_thumb.jpg

3. Fujitsubo Giken 3" stainless catback exhaust. Good condition, sounded lavish. Pickup only - Sydney - $300 ono

post-35556-0-49689700-1409498909_thumb.jpg post-35556-0-86417400-1409498918_thumb.jpg post-35556-0-49486200-1409498934_thumb.jpg

3a. 3" bellmouth dump/front pipe to suit R32 & R33 Skyline Gts-t. Good condition - $80

post-35556-0-72265900-1409500395_thumb.jpg post-35556-0-18046100-1409500399_thumb.jpg

4. FMIC & piping kit from a R33 Skyline. Includes all pipes & t-bolt clamps. The pipe off the throttle body best suits highmount turbo setups that don't have room for the standard crossover pipe. Includes a Turbosmart Vee port BOV. Pickup only - Sydney - $300 ono

post-35556-0-76737200-1409499090_thumb.jpg post-35556-0-73359700-1409499097_thumb.jpg

5. Genuine Greddy timing belt (suits rb20, rb25, rb26) + NSK idler & tensioner bearings + genuine Nissan oil seals. All brand new/unused - $200 ono

post-35556-0-71075200-1409499221_thumb.jpg

6. Genuine Nissan OEM gasket repair kit to suit Rb25DET. Perfect for a complete engine overhaul: head gasket, rocker covers incl. half moons, turbo gaskets, etc, etc. The Nissan part # for the kit is 10101-25U26. All brand new / unused - $300 ono

post-35556-0-63095900-1409499393_thumb.jpg post-35556-0-83824700-1409499404_thumb.jpg

7. Pair of Series 2 R33 Skyline headlights with HID kit installed. The passenger side light has a broken tab & has had some cracks repaired at the back of it at some point in its life, it still mounts up to the car fine though. Driver's side light has no damage

Both lenses are very clear. Includes all wiring & ballasts for the HID kit - plug and play into the car - $400

post-35556-0-16748200-1409499807_thumb.jpg post-35556-0-85073900-1409499853_thumb.jpg post-35556-0-26958900-1409499857_thumb.jpg post-35556-0-31927900-1409499860_thumb.jpg

Sorry it is sold. Headlights, dump pipe also sold

Still have: ECU, catback exhaust, FMIC kit & the timing belt kit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
    • Genuine is best. I have to replace my SIL's Audi A3 DRL module because the $20 alibaba special one has faded within a month... Sigh...
×
×
  • Create New...