Jump to content
SAU Community

New T2 Billet Turbocharger And Kit For S15 Or Other Sr20

n0nac
 Share

Recommended Posts

n0nac Contributor

n0nac

Posted
Posted

FOR SALE – BRAND NEW BOLT ON TURBOCHARGER AND KIT FOR S14/S15 SR20

PACKAGE PRICE - $1600 for quick sale

PM me for details or reply to this thread and ill PM you.

BRAND NEW TURBO! RRP $1699

(I purchased lines and fittings for $200 cost me over $2000 all up and practically giving away stuff to clear out the shed)

Billet D-GTA (56 Trim) Turbocharger

Turbocharger rated by manufacturer - 300hp to 480hp

Compressor wheel

Billet-D, Inducer 53.1mm, Major 71mm. 56 trim.

Compressor cover
Billet-B .60 A/R, 3” inlet, 2” outlet.

Turbine wheel
Billet-GTA. Major 53.8mm, Exducer 47mm.

Turbine exhaust housing
GT28 Open .64 A/R
Includes Bracket, 19psi Actuator can, rod and flap assembled.

**Turbocharger has been modified by billet (MTA) for increased oil cooling

***Billet turbochargers and MTA are same company

www.billetturbochargers.com

Reason for sale:

I changed direction with my S15 build, new engine in the mix and went to a bigger T3 series turbo and oil feed filter this time.

This turbo is perfect for a fast street car or track work!

Due to the ballbearing system, the transient response and spool up is brilliant.

Has potential for upwards of a responsive 260+ rwkw on a silvia with supporting mods (which I was aiming for)

About this product:

I have had this turbo on my car for 4000 kms. It was then rebuilt they reused housings cleaned and made made as new, but brand new CHRA, new internals, including new compressor and exhaust wheels, larger oil cooling and optimized design

This turbo performs VERY well, I believe it spools up faster than Garrett GT2871.

on full song – 20psi before 3800rpm,

Custom made Billet turbocharger by billetturbochargers (http://www.mtaturbo.com)

Just need a 3” intake also highly recommended, as stock air pipe will suck its self shut and a 2”elbow to connect turbo to hot pipe. Autobarn or pirtek (cheaper) u can source these elbows.

(Turbo got remade as I must have had some crap in the engine and caused blockage to the turbo causing it to overheat, billetturbochargers (MTA) replaced the old turbo free of charge with a whole new unit with modifications to the CHRA for additional cooling as I had a concern with it. Includes a new modified oil restrictor which fits inside oil feed line at turbo feed side)

Additional items included in this sale:

Xforce Split Dump pipe – dremel modified to suit this turbo waste gate flap.

Oil feed line

Oil return line

2xm14 bolts for water deletion (S15)

Gasket kit for turbo to manifold installation

Note:

Reuse your stock manifold, turbo exhaust studs, and follow all instructions by MTA in box.

See pix of turbo, I will add other pix when I can get to my olds place to take some.

post-17056-0-01138800-1411871149_thumb.jpg

post-17056-0-51785600-1411871165_thumb.jpg

post-17056-0-93780100-1411871167_thumb.jpg

post-17056-0-97168400-1411871169_thumb.jpg

post-17056-0-35894000-1411871172_thumb.jpg

post-17056-0-44025200-1411871174_thumb.jpg

post-17056-0-66404700-1411871176_thumb.jpg

post-17056-0-55255300-1411871178_thumb.jpg

  • 2 weeks later...
n0nac Contributor

n0nac

Posted
  • Author
Posted

price drop !!!!!!!!!! $1400 for everything - I Want It Gone!

its a brand new turbo and kit for bolt on application for s15 - just need the intake pipe 3" and a 2" silicon 90d bend for the compressor outlet.

included in the Kit

Billet Turbochargers D-GTA 56trim (480hp rated turbo - new)

bolts for blocking water jacket and brass washers.

s15 xforce dump pipe (used)

oil feed line (used for 4000kms)

oil return line (used for 2000kms)

and random gaskets that i didnt use - its a $20 MTQ Soniq gasket kit i used.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Wheel Sizes & Offsets For Skylines

      By The Bogan · Posted

      The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Does the scanner do all the CUs in the car, or only the ECU?
    • albyz34gt
      R34 N/a And R34 Turbo (gtt) Transmission.. Uh, Problem.

      By albyz34gt · Posted

      @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...