Jump to content
SAU Community

Recommended Posts

Link to Page --> http://initialdrift.com.au/nextday.php

Where and When?

Wakefield Park Raceway, 12th October 2014..
This day will be a full drift day.

Track day schedule includes two track layouts being the infield curcuit and whole circuit. If weather conditions are extremely wet we will only be using the infield section (sorry but we need to look after the facilities we use).
YOUR CAR WILL NEED TO PASS SCRUTINEERING - Working seat belts or valid harnesses, properly installed seats, working brakes and brake lights, working windscreen wipers if it rains, all wheel nuts present and no leaks are the basics. Convertibles will not be allowed unless they have a roll cage that extends above the driver's head. Any questions, please ask.
We have noticed that cars attending the event have had the same isues time after time so a warning system is now in place. If you do not attempt tp rectify issues that have been pointed out track access will be denied.
YOU WILL NEED AN AS1698 (that little red and silver sticker) APPROVED HELMET, LONG SLEEVES, PANTS AND CLOSED SHOES. Advanced drivers are encouraged to wear racesuits!
PRICES:

Gold IDA or DS Member: $180
Silver IDA Member: $180
Associate IDA Member: $210
Non-member: $210
*For those of you who would like to pay on the day, do not complete the event registration form.

Yearly Associate Membership: $50 per year. Gives you membership in a CAMS affiliated club and the ability to hold a CAMS L2NS/L2S license, which is required for most drift events. No other benefits. Available on the day. Get this if you only intend to do a few days. You can upgrade at any time to a full membership
CAMS L2NS license: $57 Available on the day. Payable on the day.
Wakefiled Park license: $50 Available on the day

NOTE: The CAMS license is a once-yearly payment (excluding daily license). After applying for one, you will eventually receive a license in the mail that can be used at all of our events for one year. If you signed up for one last time and have not yet received it, please bring the tear-off bit you received. Wakefield Park license is valid for 12 months from date of purchase and can be used at any Wakefield or Winton event in that period.
Spectators: $FREE
Here's how to work out how much it costs for you:
If you're an IDA or DS GOLD member with a CAMS licence, it's $180
If you're an IDA SILVER member with a CAMS licence, it's $180
If you're an Initial Drift Associate Member with a CAMS licence, it's $210
If you're not a member of any drift club, $210
If you're an IDA member and want to pay on the day: $180 *Do not complete the registration form
If you're not an IDA member and want to pay on the day: $210 *Do not complete the registration form

HOW TO ENTER:
*Pre Pay Only


Read and agree to this:
1. EVENT DESCRIPTION: This event will be single car drift practice, the action of driving a vehicle in a series of controlled slides throughout a pre-determined course, maintaining a standard of control. All activity will take place on the designated track section behind appropriate safety barriers. This event includes but is not limited to the following guidelines:
2. DRIVER BRIEFING: All drivers, without exception, will be required to attend the compulsory driver/participant's briefing prior to being allowed on the course. All drivers must hold a valid CAMS L2NS licence or superior. If they do not, they can apply for one.
3. ALCOHOL: The consumption of alcohol by drivers is strictly prohibited. All drivers must maintain a blood alcohol level(BAC) of 0.0 throughout the event. Consumption of alcohol in the pit, paddock or other non-public area is prohibited until the conclusion of the Meeting.
4. CARS AND ENTRANTS MUST COMPLY WITH BUT NOT LIMITED TO THE FOLLOWING SCRUTINEERING GUIDELINES:
• All wheel studs must have nuts and be tightened prior to entry to the track.
• The vehicle battery must be secured.
• No loose items are to be in the cabin (mobile phones, hand-held cameras, road maps etc.).
• Absolutely no fluid leaks.
• Brake lights must work, and brakes must be functional.
• Exhaust must exit outside the perimeter of the vehicle.
• Safety harnesses or seat belts must be complete units sourced from a recognized manufacturer and must be fitted and worn within the manufacturer's instructions or limitations and must meet the acceptable standards FIA 8853/98. FIA 8853 – 1985, SFI 16.1, FIA 8854 – 1991, AS 2596, ECE R16 & ASE35.
• Have on their coach work a blue triangle of 150 mm sides indicating the location of the battery or battery isolation switch if fitted.
• Driver's seat must be securely mounted to the cabin floor.
• A helmet which complies with AS 1698 and carries markings to that effect, or otherwise be a standard listed in Schedule D of the current CAMS manual.
Non flammable clothing must be worn, including cover from ankles to wrists to throat. No person will be permitted to participate wearing apparel of nylon or similar material. Whilst not compulsory, an approved driving suit is highly recommended.
Suitable footwear must be worn. Prohibited are (for example) thongs, Roman sandals, high-heeled shoes, nylon joggers and bare feet.
In open cars, goggles or visors with a material other than glass must be used (to AS 1609-1981).
DISCLAIMER:5. EXCLUSION OF LIABILITY, RELEASE AND ASSUMPTION OF RISK:DRIVERS
•This event is held under CAMS and follows all relevant guidelines in relation to Drifting events. If applying for a CAMS licence on the day of the event, please be sure to read Section 3 of the Application before signing it for the conditions of the licence and cover.
•Initial Drift Australia Inc reserves the right to, at any stage, refuse entry or participation in the said event and evict entrants and spectators from the venue without question or reason.

D-Day Groupings

Drift
I have seen all the DVD's, I know what I am doing! (Beginner)
I grab seconds while doing round-a-bouts. (Intermediate)
I stunt double for Tsuchiya. (Advanced)

Passengers
***CARS MUST HAVE A MINIMUM HALF CAGE TO BE ELIGIBLE TO CARRY PASSENGERS*** No Beginner groups are allowed to take passengers. Your driving will be assessed on the day so if you group yourself incorrectly just to take a passenger, be prepared for disappointment.

To get a seat in one of the cars the cost is $30 and will get you access to unlimited rides throughout the day. It is recommended to seek a drivers permission to secure a seat before you pay for a passenger run, for drivers, it is the perfect opportunity to scare your mates.
Gates open at 8am
Track Action from 9:30am till 4:00pm.
How to Pre Book


Click HERE and complete the registration form. We have enabled Paypal payments to make it easier for you all.
If you want to pay on the day that is fine, if the event sells out prior a notice will be placed here and on Facebook and the forums where the event is advertised.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...