Jump to content
SAU Community

Big Power Package For Rb26

Uncustom
 Share

Recommended Posts

Uncustom Collaborator

Uncustom

Posted
Posted

Hi guys,

placing an EOI on the following setup. I really only want to sell everything as a whole at this stage:

- RB26 6Boost ceramic coated manifold (used for 1000 kms)

- Turbosmart 50mm Progate (As new) - includes all valve seats and v-band fittings in box

- Garrett T04Z with 0.84 rear housing (used for 1000 kms) - includes lines

- Brand new Bosch 2200cc (ID2000) injectors

- Brand new Turbosmart FPR1200 fuel pressure regulator

- Camtech (Kelford) 272 degree 9.15mm lift cams (drop in - used for < 100 kms)

- GReddy Profect B Spec II Black Edition boost controller + solenoid (used, but perfect condition)

- Tomei RB26 cam gears (IN/EX) - Brand new

- Nismo low temp. thermostat

For everything above, I'm after $5500 ONO - Everything is in great condition and the setup is perfect for E85 (will make 600 HP+ easily)

In addition to these, I have 2x Garret GT2860-5s with actuators - brand new in box, I'm after $2200 ONO for these.

Please PM me or give me a text on 0411 271 646 if interested.

Located in Perth, WA.

Link to comment
https://www.sau.com.au/forums/topic/449723-big-power-package-for-rb26/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...