Jump to content
SAU Community

Recommended Posts

RB25DET cylinder head. $2500
Stage 2 port work
Clearance Machined on CNC accurately (not die grinded)
suits all available cam profiles from drop-ins to
to huge 12.5mm lifts if chasing big power numbers.
Acid Cleaned & Skimmed for fitment by Ultra torque Heads Campbelltown.
will suit RB25 or RB30 as oil gallery plugged & tapped instead of permanently welded.
HKS Cams, HKS Step 2 Valve springs, HKS Adjustable Gears.

This Head will suit Turbo charging your RB30 NA engine or
a power upgrade on your RB25 with VCT delete, or use your own VCT cams if you choose.

Combustion Chambers Lightly Polished &
Modified to for faster flame propagation & detonation prevention.

post-29115-0-09139400-1414994992_thumb.jpg

Oil gallery Plugged instead of welded so head can run VCT.

post-29115-0-42801400-1414995021.jpg

Exhaust Ports relieved & pocket ported

post-29115-0-96476000-1414995000.jpg

Intake port casting smoothed & pocket ported

post-29115-0-41788100-1414995014.jpg

Biggest drop-in HKS cams installed prior to cam lift clearance machining.

post-29115-0-01096300-1414995007_thumb.jpg

HKS drop-ins installed after clearance machining, gained extra 3mm.

post-29115-0-60264100-1414995143_thumb.jpg


cost tally;
$1200 port work
$200 Combustion Chamber Modification
$100 Remove External Casting Marks.
$300 CNC Clearance Machining
$400 Head Service
$400 HKS Cams
$250 HKS Adjustable Cam Gears
$50 Drill Tap Oil gallery & supply VCT Plug & grub screw
HKS step 2 Valve Springs $400
spend over $3000.

Link to comment
https://www.sau.com.au/forums/topic/450320-built-rb25-head/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 1 month later...


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...