Jump to content
SAU Community

Recommended Posts

Hi All,


Looking for a set of Volk TE37 OR TE37SL (19 x 10.5 +12) with or without tyres.


I am after 19 x 10.5 +12 only please, no other size variations.


Please PM or call me on 0468 895 020 with your asking price, condition and location.


Preference is for a set located in Sydney, however freight is also an option.


Thanks.

i will be selling my TE37 TTA Rims.
they are 19x10.5 +15 with Falken 452's (275's) tyres have probably done 3000km

im looking for $3000

check my build thread link in my signature for what they look like.

rims alone cost me $3300

Looking for smaller wheels and full black w/o chrome. You don't still have the rota's do you?
I looked over your build and it's f**king amazing. why would you sell that beast for?

i do still have my rota grids yes, but they will be sold with the GTR and i am keeping my TE37's or might sell them thats why i wrote in here.
no dramas , why do you want such little wheels for your 33, you need to go at least 18 or 19 for a nice size and offset.
im selling as i want to buy a house, so if you know anyone thats looking for an amzing 34 let them know ;)

I might buy rotas brand new, they are cheap compared to rays.
I have 235/40r 18inch and they are low profile (imo), I don't like them because they are chrome (embarrassed to be seen with anything chrome). I don't understand tyres/wheels. I might go 18 or 19's if i can get more profile. need more rubber, worried about cracking wheel on pot hole or something.
I'd buy if i had the money. looks like such a sweet car!

they are pretty cheap.

you could go a 235/35/18.... i dont know much about 33 gts-t fitment, but i would be looking around the 18x8.5 + 15 front and 18x9.5 + 20 rear

but have a search on here its been covered heaps im sure.

Yeah i will. I don't understand what this means "18x8.5 + 15 front and 18x9.5 + 20 rear"
18 is inch. what's 8.5 and +15? Guessing profile and width.
Cheers heaps for your help

www.willtheyfit.com
is the best site to help you work out.
18 x 8.5 + 15
18 is the size or the height ....you should know that.
8.5 is the width of the rim how wide it is.
+15 is the offset, so where the middle of the rim bolts onto the hubs.
for example an offset of 0 will be the centre of the rim and it will bolt onto the hub in the dead centre of the rim.
an offset of + anything means where the rim bolts onto the hub will be towards the outside of the rim letting the rim sit further inside or under the guards

an offset of - anything means where the rim bolts onto the hub will be towards the inside of the rim letting the rim sit further outside the guards or towards the car next to you.

its hard to get your head around if you have never learnt about it. but once you understand and read up on it you will understand it.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...