Jump to content
SAU Community

Recommended Posts

Hey guys,

Generally not the type of vehicle that you would often see advertised on SAU however, I feel it may appeal to someone looking for a tidy daily or tow vehicle etc. Turns a lot of heads and is an absolute pleasure to drive/own. Use to own imports of various models and purchased this as I was soon to be a father. I needed something that was generous with space and was also practical. Now that my daughter has turned 5 and has grown up I am looking at spoiling myself and going back to an import.

Rundown:

2.5L TD - Spanish Build

5 spd-Auto 4x4

122xxx kms

3" DPF back exhaust

Custom Intercooler kit (304 S/S piping)

Custom Intake (304 S/S)

24" Alloys powder coated gloss black fitted with near new 275/30 tyres

Alpine R Type speakers front and back

Autometer Z Series Boost Gauge

Inside of well body just been re-painted, not a single scratch inside

Colour coded sports bar and rear step

Extras:

A spare set of Lexani LSS10 24" alloys

2 x Spare sets of 24" Tyres, one set has about 40% tread left, the other set is about 95%

Set of 17" factory alloys with tyres

Spare sports bar - polished

Spare set of Genuine Nissan rubber floor mats front and back

All factory items that have been swapped out eg. Intercooler, piping etc

Have just had the truck serviced, had all belts, pads and rotors replaced @ last service. The ute has never been abused and only served me for daily purposes. Has had a very easy life and anything that was showing signs of wear was always promptly replaced.

Got the mechanics to do a diesel purge on it and fuel re-learn. Now runs super quiet and has better fuel economy than before.

I can be contacted on 0405 467 630 or via email - [email protected]

Chasing 26k and am pretty firm with that. Over 10k worth of wheels alone!

Happy to answer any questions regarding the ute. May consider a swap however, only for a 33/34 gtr. Cash differences to be negotiated.

Thanks for looking.

Shaun

post-77042-0-26489200-1415931540_thumb.jpg

Edited by shaunus

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...