Jump to content
SAU Community

Recommended Posts

Hey guys,

i recently bought a 1997 S2 R33 gtst,

I have changed the coil packs and the cleaned the AFM along with buying a new pod filter.

Had the Cam Belts re done etc etc and she was running amazing except for when i go to boost it feels as though the power isnt there..

I then went and changed the spark plugs to NGK etc.

Now when im reaching high rev's about to hit boost the car just jolts... this has never happened be4. started happening after i changed the spark plugs. (note i have not re-gaped the plugs or anything)

My first thought was that maybe its the fuel pump but honestly no idea.

does anyone have any idea what the issue maybe.

Thanks in advance.

1 other thought chap, did you install a boost controller? if you do, make sure it isnt set above 10-12 psi... if it is, just click it back a few.... you could be hitting the brick wall of boost cut.

Hey paul i dont have a boost controller atm. Plugs went back in tonight and she isn't jolting anymore although now it feels like she is cutting out while trying to boost almost as if it cant handle it. Any ideas? Im thinking ill have to send her down to the mechanics.

Cheers

if it is doing it at about 4500 rpm my man, its your coil packs. very common problem as with age they deteriorate.

find a spare set from some where and swap them out...

now bare in mind they are series dependant. s2 33 coils wont work on s1.

33 gtr coils will work on s1 but not s2. should be plenty around, if not check out amayama.com for a full set of replacement oem ones.

Thanks mate... changing the coil packs was the first thing i did when i bought the car... i have ordered spitfire coil packs which should arrive today or tomorrow so ill put them in and see how we go.. thanks for ur help.

righto!

if you have 12 coilpacks swap and change with them, find six that work. its a pain but always good to have em....

all good mate, do us a favour, WHEN you sort it, cos you will, pop back and give it an answer.

nothing worse than googling a problem, reading a thread, then finding out the OP didnt say what it was!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...