Jump to content
SAU Community

Recommended Posts

I have for sale:

External Wastegate - Turbosmart WG38 Ultra-gate 38 7psi spring , blue. Part number TS-0501-1101

Was only used for 3 months in car. Removed because car is no longer registered so parting it out.

These are between approximately $410 - $485 brand new.

I am asking $250, item is in excellent condition, still boxed and barely used.

post-59604-0-42830500-1423312717_thumb.jpg post-59604-0-21580300-1423312745_thumb.jpg post-59604-0-67804700-1423312796_thumb.jpg post-59604-0-15004800-1423312851_thumb.jpg

"Greddy" Style RB25 Plenum (from my R33 series 1 motor)

In good condition. Only minor thing to note, 2 of the 4 holes where the throttlebody attaches to the plenum may need drilling out and re-tapping as the bolts are broken off. Having said that, I was running the plenum without a problem when attached to the throttle body using just 2 bolts and proper gasket sealant.

Asking $200 ONO

post-59604-0-02443800-1423312902_thumb.jpg

Both items availible for pickup melbourne south east.

Mobile 0458 762 075

Thanks

Brent

  • 2 weeks later...
  • 3 months later...

Hey joey91 , Sorry for the late reply, I haven't logged into SAU in a longtime and I forgot I had this listing up!

In answer to your question, Yes it is still available.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...