Jump to content
SAU Community

[qld] Fs: Dba 4000 Rear Rotors, Bc Br Coilovers, Gktech V3 Arms, Diff Bushes, Subframe Bushes, Tie Rod Ends, 33 Gtr Cluster 15,517km


Recommended Posts

Location: Sunshine Coast, QLD (Cooroy Area)

Contact: Jamie on 0420 856 four6four

Pictures: See attached (castor rods not in pics as I have to pull them off the car still)

Item: DBA 4000 series T3 slotted rotors to suit rear of R33 gts-t, will also throw in brand new QFM HPX pads to suit

Condition: Have been fitted to car only. Have not seen any use but I did wipe the rotors with brake cleaner as per instructions before fitting to remove the film

Price: $300 (I paid $352 for the pair of rotors and $79 for the pads from brakes direct)

Item: BC BR coilovers to suit R33 gtst. 8kg/mm and 6kg/mm spring rates (standard BC spring rate for the car).

Condition: These were fitted to the car and have been adjusted up and down a few times. They have not seen the road and have only been used to roll the car around on. There are some slight marks on the thread body from adjusting which are only cosmetic. C spanners, nuts, stickers, manual etc all in the box still.

Price: $800 (Paid $1299)

Item: GKTech V3 Adjustable Caster arms, rear camber arms, rear toe arms, rear traction arms, Solid subframe bushes, solid diff bushes, tie rod end kit and offset bush delete kit. all suit r33/34/s14/15

Condition: All unused aside from caster arms which were only fitted. Threads on some of the adjustable arms were quite snug but apparently this is common

Price: Castor, rear camber, toe and traction arms $400 and will throw in the offset bush delete kit ($700 new for arms)

Solid subframe and diff bushes $75 (New price was $110 for subframe and $50 for diff bushes)

High misalignment tie rod end kit $75 (New price $129)

If someone wants the lot I can negotiate as it will be easier for me.

Item: R33 GTR V spec cluster, has 15,517 genuine km on it.

Condition: Used but almost as new, few little bits of dust in behind the plastic if you look hard, no scratches, perfect replacement for those with misbehaving tacho needle issues.

Price: Not really sure what it's worth second hand but will say $250 as the others I've seen on ebay with 60,000km plus have been ranging from $300 to $400

post-2140-0-69402100-1424225850_thumb.jpg

post-2140-0-18003700-1424225974_thumb.jpg

post-2140-0-40715600-1424226087_thumb.jpg

post-2140-0-35831100-1424226318_thumb.jpg

post-2140-0-22943500-1424226425_thumb.jpg

post-2140-0-15827800-1424226547_thumb.jpg

post-2140-0-75296800-1424226653_thumb.jpg

post-2140-0-38648000-1424226762_thumb.jpg

post-2140-0-66916000-1424226869_thumb.jpg

post-2140-0-68409100-1424226978_thumb.jpg

post-2140-0-38684600-1424227189_thumb.jpg

post-2140-0-45010000-1424227295_thumb.jpg

post-2140-0-96846700-1424227401_thumb.jpg

post-2140-0-79491200-1424227510_thumb.jpg

post-2140-0-90493600-1424227619_thumb.jpg

post-2140-0-52883700-1424227887_thumb.jpg

post-2140-0-03327500-1424227995_thumb.jpg

post-2140-0-15859700-1424228104_thumb.jpg

Will the adjustable arms def fit an r34 mate??

Edit - sorry mate just reread and realised uve sold em

Edited by jase-r34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had double clamped all the pipes but I checked them over any way, everything tight and secure. feels and sounds like a electrical short/failure, as it is an abrupt and aggressive stumble, that instantly comes and goes right at 4k mark...like clock work fuel pump and filter are new new coils and plugs injectors where cleaned and tested 200 miles plus ago no black smoke cleaned MAF   same results, other ideas? some other sensor?  
    • Yes, just without the annoying use of the word hybrid. We stopped using that term 20 years ago when we realised it meant different things to different people. Even "highflow" can represent more than one way of achieving the goal of getting more flow out of a turbo. But at least it says what it does on the box.
    • OH, when they say "solid buckets", I always interpeted that as "shimless". (Which is not the same as the "shimness word I invented above to represent the same idea that the buckets act as shims also!!). Still the same problem though. So it appears that buying a "kit" from Tomei is a two step process. Makes sense. Doesn't make sense in the context of a "kit" though.
    • Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Lamb roast on Saturday will be different 🥲
×
×
  • Create New...