Jump to content
SAU Community

Idle Issue

crumac86

By crumac86,
in General Maintenance

 Share

Recommended Posts

crumac86 Enthusiast

crumac86

Posted
Posted

Hi all, have been searching for a few days, and can't find the exact cause to my issue. My r33 gtst wont slow down when I deacclerate without the pushing the brake pedal. Mostly noticeable in a car park when doing 10kms it keeps a constant speed without my foot on the accelerator. When I push the clutch in to park it idles around 1500 for 3 seconds and drops to normal. I have cleaned my iac valve, and going to clean my afm tomorrow. Has anyone had this issue before? Any help would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted

Sometimes you get the check engine light. Sometimes you don't :(

Codes can tell you if you have access via a scan tool

You can use a multi meter to test it on or off the car. - Just google testing 02 sensor :thumbsup:

or just Take it out, visually inspect, clean and refit. Still got the issue then go further :)

Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/#findComment-7519513
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

I cleaned my afm and idles better. Will need to take it for a drive to see results. I put my hand over the afm while idling to see if any leaks and it stalled. Is this normal?

Probably.

That's not a normal thing to do and won't check anything.

Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/#findComment-7520698
Share on other sites
crumac86 Enthusiast

crumac86

Posted
  • Author
Posted
https://www.google.com.au/url?sa=t&source=web&rct=j&ei=1Ew3VcS5MMK1mAWn2oGwBg&url=http://www.skylineowners.com/forum/21-tuning-technical-questions/214045-diy-boost-vacuum-leak-testing.html&ved=0CC8QFjAD&usg=AFQjCNExK8Kyv67PkPD1DKmfhygZb-d21w
Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/#findComment-7520712
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted
Well that explains why you did it, but its not useful as you found out.

Pressure testing is the best.

Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/#findComment-7520714
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...