Jump to content
SAU Community

WSID wed 14/7/04

BOO57A

By BOO57A,
in Events Archive

 Share

Recommended Posts

siksII Grand Master

siksII

Posted
Posted

BOOSTD: wrxhoon's name is jerry ;) and his best times were 12.07(pretty sure) but i know he ran 12.1.. apparently his last run was shit (after i left) so u must have seen that :D

terminal speed was 120mph on his best run, but with a crappy 2.0something 60 foot time, so could be a lot faster!

That m coupe was crazy! sounded good...and backed it up :)

wrxhoon Grand Master

wrxhoon

Posted
Posted
BOOSTD: wrxhoon's name is jerry ;) and his best times were 12.07(pretty sure) but i know he ran 12.1.. apparently his last run was shit (after i left) so u must have seen that :rofl:

terminal speed was 120mph on his best run, but with a crappy 2.0something 60 foot time, so could be a lot faster!

That m coupe was crazy! sounded good...and backed it up ;)

yea you are right arup best time was 12.069 @120.24 mph and 2.017 60 ft

that was the run i had with bill ( butthead ) he ran [email protected] mph and 1.866 60 ft .

bill ran 12.1 on his last run .

on my last run i got a good start 1.873 60 ft but then hit the cutout anded up running 12.333 @115.89 mph

on an earlier run i did 12.157 @119.87 mph and 2.089 60 ft ( bogged down on that run not enough rpm and dropped the clutch to quick .

it was much easier to take off with the smaller turbos .

it must have been very slippery today though , mick could only get 2.0 6o ft ,

last time we went he got 3 runs 1.8.. , 1.8.. and 1.7...

ah well i'm goping to have another go at 11 pass sometime in the near future ( went so close today i'm sure i'll get it )

siksII Grand Master

siksII

Posted
Posted

next time u will hopefully get the 11 sec pass, it is a definite possibility...coming down to the launch and how slippery it is i guess!! it was great to watch, cant wait to have a run myself (when i actually get another car!)

BOO57A Rising Star

BOO57A

Posted
  • Author
Posted

Im not even going to bother saying what i got other than pissed off with numerous things. Good thing u didnt come up jase was a waste of time. Organisation was shit and i arived at 3:30 and only got 2 runs after 2.5 hours in the scrutineering line. what a ****ing joke!!!!!!!

One good thing was that I had a few words with the events co ordinator and also with Jim Reid himself and let them in on a few problems going on in the night that with some work could improve things for everyone in the future. Heres hoping it does!!!!

I guess ill just have to wait till the next street meet and see if anything changes.

Cheers

Scott.

 Share
Go to topic listing


  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...