Jump to content
SAU Community

Recommended Posts

Selling the following, no longer needed;


1 x Aftermarket Industries 3 litre surge tank $150

1 x 25 feet of 1/2" aluminium red anodized hard line $70

1 x 25 feet of 1/2" aluminium blue anodized hard line $70

1 x 25 feet of 3/8" aluminium blue anodized hard line $60

10 x blue -8 tube nut coupling to suit 1/2" fuel line $10 each

9 x blue -8 tube sleeve to suit nut coupling $10 each

4 x black -8 tube nut coupling to suit 1/2" fuel line $10 each

5 x black -8 tube sleeve to suit nut coupling $10 each


All new and un-used.


There are two tube nut couplings and two tube sleeves in each blister pack.


I was planning on using hard lines to redo the fuel system in my car but these are no longer needed as I have changed my plans. The aluminium hard line is rated to 250 psi which far exceeds any fuel pressure demand you can throw at it.


Pick up from Robina area Gold Coast preferred, buyer to pay delivery.


Prices are negotiable, throw me an offer, sick of looking at it.


Just a heads up, I am out of the country from this Saturday, returning the following Sunday.


Thanks


post-20486-0-65705600-1438220046_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 8 months later...
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...