Jump to content
SAU Community

For Sale 2003 Nm35 Ar-x Stagea

Mfc01287
 Share

Recommended Posts

Mfc01287 Rookie

Mfc01287

Posted
Posted (edited)

For sale is my 2003 Stagea AR-X and has done 180,000km

The car has no modifications at all.

Recently the thermostat failed shut and the engine overheated and did some minor damage.

It had a very slight trace of exhaust gas in the coolant and was patched up with stop leak.

The mechanic says it will be good for about 6 months before the leak issues come back.

It is running without a thermostat at the moment.

The body is in great condition as can be seen in photos.

I would like to sell it cheap as a shell for someone looking to swap in another engine or recondition the old engine.

Otherwise you could just drive it as is, up to you.

It is currently registered until October 2016.

Asking for $4000 ONO.

The CD changer broke on a trip to Pinnacles due to vibrations from the rough roads.

Also included is a spare second hand ATTESA 4WD pump assembly, which costs a fortune if you’ve ever been quoted by Nissan to replace one.

The 4WD light came on intermittently and I was able to fix it for about 2 years by mounting the ATTESA relay on its side instead of upright in the holder.

The pump assembly still works but it feels weak.

I guess it has worn out because of the sticky relay contact forcing the pump to run constantly.

It's so sad that the engine gave up so easily because otherwise it's been a great practical car and has such a unique turbo spool sound.

Thanks for viewing.

post-141987-0-58411000-1454428489_thumb.jpg

post-141987-0-48759500-1454428495_thumb.jpg

post-141987-0-21385100-1454428500_thumb.jpg

post-141987-0-12134200-1454428505_thumb.jpg

Edited by Mfc01287
Link to comment
https://www.sau.com.au/forums/topic/462675-for-sale-2003-nm35-ar-x-stagea/
Share on other sites
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...