Jump to content
SAU Community

Exedy Heavy Duty Cushion Button Clutch & Flywheel

Borci88
 Share

Recommended Posts

Borci88 Veteran

Borci88

Posted
Posted

I have for sale an Exedy Heavy Duty Cushion Button Clutch & Lightened Exedy Flywheel. The clutch has done 2,000kms including run in on the dyno, I pulled it out when I rebuilt the engine and a good price on a Coppermix came up so I purchased that. Clutch has very very little wear and has been sitting in storage for the last year. Flywheel still has very visible machining marks from machining when the clutch was installed to show that it's done very little kilometres.

This clutch is a Pull clutch and is to suit late model R32 GTR and all R33 GTRs.
Item is located in south eastern suburbs of Victoria, also willing to post.

post-70634-0-38834700-1455874840_thumb.jpg

post-70634-0-23588000-1455875039_thumb.jpg

post-70634-0-13970900-1455875240_thumb.jpg

post-70634-0-72136200-1455875637_thumb.jpg

kingtube69 Experienced

kingtube69

Posted
Posted

Can vouch for this clutch and flywheel - I have the extra HD on my R33 and it's great. Drives really nice too.

Whoever buys this will be very happy with it.

GLWS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By joshuaho96 · Posted

      I did basically the same procedure on a ZF6HP but the reason to pull the valve body is to replace the seals between the valve body and the transmission which are notorious for leaking pressure with age causing poor shifting and burning out the clutches. If you just wanted to exchange all the fluid you should be able to undo one of the transmission cooler return lines to drain into a bucket while using the pressure filler to keep it topped off. 
    • Duncan
      EFR7670 exhaust housing selection RB26

      By Duncan · Posted

      Title sorted
    • LegendGTR
      EFR7670 exhaust housing selection RB26

      By LegendGTR · Posted

      The title should have posted "EFR7670 exhaust housing selection RB26" I can seem to edit thr title on my Android.
    • LegendGTR
      EFR7670 exhaust housing selection RB26

      By LegendGTR · Posted

      I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • PranK
      Stock Airbox and Snorkle for RWC - VIC west

      By PranK · Posted

      Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
×
×
  • Create New...