Jump to content
SAU Community

Recommended Posts

 

For sale rb25-30 external oil pump set up

All is needed is a 20mm x 576mm 8m belt and ross balancer to suit wat u have got $2900ono.

Does not include Balancer

Was fitted to a r32 with rb2530 .

Selling due to changing to dry sump

$2900

Penrith.sydney west nsw

Any other questions just ask

0422720640

Wat u see i the pic is wat u get

20170202_195656.jpeg

 

Also selling a rb25 high mount turbo manifold.(i made myself) T3 flange
No cracks,ceramic coated
With genuine turbosmart 50mm wastegate and stainless steel sreamer pipe
Both items are 2yrs old
Was in are r32 gtst
$1000 20170205_132512.thumb.jpeg.58bce44080170

R32 oil catch can (i made myself)
U need to relocate the fuse box
Has 2off -12an fittings and a 32mm dia k&n filter for breather $250
I can well a -10 return drain to the sump if needed
1486262489119.thumb.jpeg.81fcb3d67d03ea6IMG_20160620_192309.jpeg.8af31c77158b66b

  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...