Jay95R33 Posted July 28, 2004 Share Posted July 28, 2004 G'day guys, Well as some of you know, I wrote my R33 GTS-t off a few months ago and I've now got a RS Four-V These bits weren't on the insurance policy for the R33 so I took them out before the car was sent to the auctions TOMEI Master Brake Cylinder Stopper Bolts to the strut tower (there's two bolt holes there from factory) and stops the firewall from flexing under hard braking. Also improves brake feel at hard braking. I'd put this on the Stagea, but the alarm is mounted there and can't be moved Selling for $60. SOLD Nismo Black Chrome gear knob NEVER USED ! I bought and paid for this and while I was waiting for it to be delivered I had the accident.. Bought it for $110, selling it for $80. It has no scratches at all, brand spanking new... SOLD Turbo HPBC bleed valve Perfect working condition, used for about 18 months. It has two valves in it, one to stop wastegate creep (adjustable) and the normal bleed valve. I had this installed with very short hoses and it barely spiked at all ! Bought for $135, selling for $75. 3 Gauges in a DIN mount All are mechanical gauges. Oil temp, boost and oil presure. All are VDO gauges and have blue bulbs in them. Comes with all the fittings you need to hook them up to the motor. The oil presure gauge is brand new and never used. I had a fitting made up and I was just about to put it in the car when I had the accident !! The front is covered in black leather that matches in with the dash pad. After $250 for them.SOLD Factory R33 GTS-t front mats Good condition, have the factory 'Skyline' metal logo tag on them. $45 and they are yours. SOLD Factory R32 GTS-t manual ECU Was planning on modding this and using it in the R33 GTS-t, but never got around to it. Not modified - totally stock $100. SOLD Factory Din Pocket Took this out when I installed the DIN gauges. Factory din pocket with flip down front. Has a cut out in the back from where I had a Profec A mounted for a while. I got the $hit's with the Profec A and went back to the bleed valve !!! $20.SOLD Happy to do COD post (may need a deposit) or direct credit, but either way the buyer pays for postage. Email me at [email protected] or drop me a PM. Cheers Jayson Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/ Share on other sites More sharing options...
R32Big_boy Posted July 28, 2004 Share Posted July 28, 2004 Do you know if the set of 3 gauges will fit into a 32 or if a lot of modifying will be needed to fit them, coz i am very intrested in them. Thanks champ. Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-957805 Share on other sites More sharing options...
Jay95R33 Posted July 28, 2004 Author Share Posted July 28, 2004 I honestly don't know. They are a standard DIN size if that helps any, there is a piece of 3mm MDF mounted 90 degrees to the face that get's bolted to the frame that runs around the factory stereo cradle/mount. J Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-957827 Share on other sites More sharing options...
R32Big_boy Posted July 28, 2004 Share Posted July 28, 2004 Well if you can give me dimensions, length and height then i'll find out if it will fit. Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-957840 Share on other sites More sharing options...
Jay95R33 Posted July 29, 2004 Author Share Posted July 29, 2004 R32_BB - dimensions are 181mm wide and 72mm high. I hope that helps. J Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959208 Share on other sites More sharing options...
R32Big_boy Posted July 29, 2004 Share Posted July 29, 2004 Mines 181 wide but only 56mm high, so i dont think it will fit. Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959620 Share on other sites More sharing options...
Jay95R33 Posted July 29, 2004 Author Share Posted July 29, 2004 Ahh, one thing I should've mentioned about the DIN gauges. The bottom part of the face on the holder actually sits behind the console - if you have a good look at the pictures you can see a slight wear line where the console sits against the face of the mount. I just measured the face of the mount and the part that is viewable once in the console is 58mm. I can email you the plans for it if you want to have a better look at it. J Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959631 Share on other sites More sharing options...
R32Big_boy Posted July 29, 2004 Share Posted July 29, 2004 Ahh, now i see what your talking about. Then it would fit if its 58mm coz i was measuing rough. if you can mail me [email protected] Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959642 Share on other sites More sharing options...
Jay95R33 Posted July 29, 2004 Author Share Posted July 29, 2004 No worries - I'll drop you a email now. J Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959645 Share on other sites More sharing options...
R32Big_boy Posted July 29, 2004 Share Posted July 29, 2004 e-mail recieved. Will get back to you on cash etc. Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959653 Share on other sites More sharing options...
Jay95R33 Posted July 29, 2004 Author Share Posted July 29, 2004 no problems. J Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959678 Share on other sites More sharing options...
CroatianDlite Posted July 29, 2004 Share Posted July 29, 2004 check pm pleasee!! Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-959822 Share on other sites More sharing options...
Jay95R33 Posted July 30, 2004 Author Share Posted July 30, 2004 CroatianDlite - PM sent back. Nismo gearknob - SOLD DIN pocket - SOLD Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-960033 Share on other sites More sharing options...
SXN180 Posted July 30, 2004 Share Posted July 30, 2004 Hi Jayson, PM Sent Cheers Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-960599 Share on other sites More sharing options...
Jay95R33 Posted July 30, 2004 Author Share Posted July 30, 2004 Thanks SXN180 - PM on the way back to you. R32 ECU is now sold. J Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-960610 Share on other sites More sharing options...
Jay95R33 Posted July 30, 2004 Author Share Posted July 30, 2004 Added a new item - Tomei master brake cylinder stopper & added a picture of the mats. J Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-960742 Share on other sites More sharing options...
CroatianDlite Posted July 30, 2004 Share Posted July 30, 2004 pm again Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-961288 Share on other sites More sharing options...
Jay95R33 Posted July 30, 2004 Author Share Posted July 30, 2004 Mats are now on hold pending payment. Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-961389 Share on other sites More sharing options...
Jay95R33 Posted July 31, 2004 Author Share Posted July 31, 2004 TOMEI Master brake cylinder stopper is sold. Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-961666 Share on other sites More sharing options...
Jay95R33 Posted August 2, 2004 Author Share Posted August 2, 2004 Gauges are on hold now. Link to comment https://www.sau.com.au/forums/topic/47388-nismo-knob-gauges-bleed-valve-factory-mats-r32-ecu/#findComment-963349 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now