Jump to content
SAU Community

R34 ticking noise - neo engine

Danowner
 Share

Recommended Posts

Danowner Contributor

Danowner

Posted
Posted

Ok so I'll attach the video I just took and see what you all think it is. It's started probably about a week ago. My 34 currently has 216,000 km on it, fully stock apart from pod filter and boost controller running 12 psi, and yeah it's just an annoying ticking sound. Not super noticeable when driving unless you really listen for it, but when near something parked up, or next to a car, the noise echoes against it, and it's really blood annoying. In the vid just listen for the constant tick noise that goes up with the RPMs. Just trying to figure out what it is, how to fix it, and if it's urgent. So far with a little bit of research on YouTube trying to match the sound, I've found it could be lifters or timing belt pulley/ idler

 

https://youtu.be/w_6_NSCjT4I

Link to comment
https://www.sau.com.au/forums/topic/475550-r34-ticking-noise-neo-engine/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

Can't tell if it's mechanical or an exhaust manifold leak from the video.  Use a hose as a stethoscope to listen around the exhaust manifold and turbo gaskets.  If not there, use same hose, or a screwdriver as stethoscope to listen around cam covers, timing cover, etc, to see if you can localise it.  It could be worn tappets causing valve noise, or it could be your VCT solenoid or belt tensioner up the shit, or a number of other random possibilities.

Danowner Contributor

Danowner

Posted
  • Author
Posted

So just got a screw driver and went on the vct solenoid and all that good stuff, couldn't hear the noise. Went on the right side rocker cover, could hear it, left side slightly but not a lot at all. The closer to the front of the engine I went, the louder it was. The cas was the loudest I could get it. So I'm guessing it's something timing related? Perhaps could be one of the timing pulleys? Not sure if tightening it would do anything though. Another possibility if it's internal, could be oil viscosity maybe? With the KM's its got, I'm running 10W50, did the service last weekend

Danowner Contributor

Danowner

Posted
  • Author
Posted

Taking it off, it needs to be back in the exact same location doesn't it? If it's put back slightly different, what would the outcome be? Would the cams just smack against the rocker cover? 

GTSBoy Grand Master

GTSBoy

Posted
Posted

Cams can't smack on the rocker cover.  That's not possible.  They rotate through 360° in there as normal business.  The actual risk of taking the timing arrangement apart and not putting it back together correctly is that you will strike open valves with rising pistons and trash at least part of the motor.  This is not to be contemplated if you do not know how to keep it all together in the right places as you take it apart and put it back together.

I wasn't talking about thoroughly dismantling the timing arrangement though.  Just about pulling the CAS off (and then maybe the upper timing cover too for a better look).  And yes, the CAS needs to go back exactly where it came from, or you need a timing light to be able to reset it.

Danowner Contributor

Danowner

Posted
  • Author
Posted

I recently took the CAS off, marked my timing cover, got the new one, marked that up (It is a clear one), and put it in. The timing belt looked in pretty good condition, so I decided not to change it. The ticking didn't start anywhere near after doing any of that, so couldn't have been that. If I were to take it off, what would I be looking for?

Danowner Contributor

Danowner

Posted
  • Author
Posted

Ok, I took off the CAS. The bearing is making a noise when spinning it. louder than most bearings that I've heard. I took it off, lubricated and cleaned it, and the noise actually stopped for a bit. Then it started up again after about 20 mins of driving. Might try take it off again and properly lubricate it and give it another clean, see if that does anything. Not willing to buy another CAS as they're going for around $800

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • GTSBoy
      Airbox for +T

      By GTSBoy · Posted

      By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...