Jump to content
SAU Community

Recommended Posts

Just installed my mates system for him, sub 6x9's and head unit. Didnt notice it before I put the amp and sub in but when we took it for a "fully sik test cruise" every 10 seconds or so the sound cuts out for a split second, the song keeps going but just for the split second there is nothing, no idea what could be causing it ... I would give you specs of the system but all I know is he has my old JBL GTO400 600watt amp and a 12 inch Pioneer sub. dont remember the model of the deck or anything, so anyone shed some light on this for me

cheers

Sam

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/
Share on other sites

12 inch pioneer amp??? lol

Whats the rating for the sub?? maybe your amp is playing up on ya... might be cutting out coz of hign voltage or bad signal...

The problem is most likely the amp im guessing. Are all the speakers cutting out or just the sub??

If it is all then the amp is your culprit. I suggest temporarily fitting another amp to test and see...

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972031
Share on other sites

I just had to give back my 1200 w S amp :) so im also looking for another one.. so I have no bass in the car.. and the amp my mate is iusing he bought off me about a week before I had to get rid of my good one, so I wasnt to happy about that one :D

but oh well...

looks liek i need to go shopping :)

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972051
Share on other sites

If all the speakers are hooked up to the amp try to plug some directly into the HU.

If all speakers/woofers cut out-

Check all the wires to each speaker/driver. If they short it will cut-out from the HU.

If it's just speakers connected to the amp that cut out-

Make sure your groundwire isn't jumping around and it's in securely attached. Also make sure it's the same guage as your power cable.

Make sure your 'remote" (usually blue) is connected properly and getting current. If it's falling out or jumping around your amp might be being told the HU is off.

Also - if your HU lights cut out (ie. the power to your HU cuts out as well) then you may not have enough current to your HU in which case it's the incorrect power cable you're hooked into or ground wire is lose.

Other than that if all your speakers are hooked up to the amp and you can't be bothered hooking up some speakers to the HU I would put the amp in the car where you can keep an eye on the light and see if it's cutting out.

Hope that helps. Let us know how it goes.

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972218
Share on other sites

Well if only the sub is hooked up to the amp and yet all other speakers (I'm assuming they'd be then hooked up to the HU) are cutting out then theres no reason to think it's the sub thats busted.

If all the speakers cut out, but the sub stays on (even though the driver cuts out) AND the head unit stays on I'd find that quite strange.

I would say it's quite strange if the HU stays on but doesn't produce any output. I wonder if it's possible the current is dropping enough for the HU to be unable to produce output but not enough for it to turn off. I've never seen that happen and don't know if it's possible. When your mate gets back see if it happens above a certain volume. This might give you a clue to this fact.

Good luck - let us know how it goes slash when he gets back.

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972683
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...