Jump to content
SAU Community

Recommended Posts

Purchased this obd2 from https://www.jaycar.com.au/obd-ii-engine-code-reader-with-bluetooth-technology/p/PP2145

 

Has anyone had any exprience with setting up Oil Temps with Torque Pro?

I've used a custom PID as well as installing the Infiniti and Nissan plugins showing the VVT Oil Temps but it could never be read?
I've read other posts that it has worked for people but those are from USA sites. Just wondering if anyone had this setup on their 370gt?

  • 2 weeks later...
On 1/6/2021 at 4:18 PM, V35_Paul said:

This was mine

how did you set this up :O? 
So I see a RCA to HDMI converter, then a phone with HDMI port? 

i managed to get the oil temps working but im using my phone to look at the app 

 

Edited by YouTRIPPIN?
On 1/10/2021 at 3:22 PM, YouTRIPPIN? said:

cheaper one is fine.

yeah you can get some old phones with mini hdmi

 

On 1/10/2021 at 3:30 PM, YouTRIPPIN? said:

actually nvm... my car doesnt have the RCA ports it has this other port😥

 

 

that's some weird phone plug for older iphones.

the car is meant to have a cable to plug your old iphone in

Just now, V35_Paul said:

that's some weird phone plug for older iphones.

the car is meant to have a cable to plug your old iphone in

yea,do you know if its even possible to screen mirror with this kinda plug 😐

a lot of the posts just says to install a RCA port instead :(

nah no screen mirror.

But you can spend some money and get an Android system installed to replace the screen. Synergy Motorsport in Adelaide can do it and I'm 90% sure Autotainment in Perth can.

I don't know anywhere else.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...