Jump to content
SAU Community

Recommended Posts

I am still having trouble with something to do with my AFM.

I thought it was the wiring to begin with, but have rewired it and the same problem persists.

Does someone have an AFM hanging around that I can borrow or buy?

Would be much appreciated

:P

edit: And I think it needs to be from a series 1 (green sticker), cause series 1 and series 2 are different from what I've been told.....anyone who knows better, feel free to enlighten me...

no problemo.....thanks anyway, but I have solved the problem.

Figured the AFM was farked anyway so bit the bullet this arvo and pulled it apart.

Turns out the soldered connection from one of the pins (which the plug connects to) to the PCB had broken. Gave them all a dab of solder just to be sure and then siliconed the cover back on and she's as good as gold.

Previously if I moved the AFM at all the car would splutter and eventually stall. Now I can shake the farker like a screaming child (:D ....j/k) and it doesn't miss a beat.

Whacked it all back together and took it for a spin over the bumpiest road I could find and it's all good :D

It's taken a week and a half to finally track down the source of the problem, so I'm pretty stoked atm....just wish I hadn't bastardised the wiring in the first place, cause that could have saved me a lot of heartache to begin with. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...