Jump to content
SAU Community

Recommended Posts

ok hi there im from melbourne and i was looking into buying this boost controller

http://firesport.ipspace.com/?section=item...n=show&id=10382

im probarly gonna purchase it today i was wondering is this type of boost controller leagal in VIC or melb meaning i wont get done buy the epa...and aslo are they any good ?

Link to comment
https://www.sau.com.au/forums/topic/50359-boost-controler/
Share on other sites

most boost controllers are illegal. any boost above factory boost setting modifies your emitions and therefore violates epa regulations. the best is an electronic solenoid, that turbo smart one is a bleed value, meaning it will always bleed and have a max limit of X psi whatever you set. an electronic solenoid will bleed once it reaches X psi (whatever you set). also the electronic solenoid will handle different conditiions better. the bleed value will spike in different weather etc, like if its a very cool day and its set to 8psi it may spike to 11psi whereas the electronic solenoid should stay at 8psi. of course this depends on the actuator fitted to the turbo, im assuming stock turbo here

if you want to look at an electronic controller check out a hks evc 3 or 4 or 5

i hope im correct with all that info :)

Link to comment
https://www.sau.com.au/forums/topic/50359-boost-controler/#findComment-1000677
Share on other sites

most boost controllers are illegal. any boost above factory boost setting modifies your emitions and therefore violates epa regulations. the best is an electronic solenoid, that turbo smart one is a bleed value, meaning it will always bleed and have a max limit of X psi whatever you set. an electronic solenoid will bleed once it reaches X psi (whatever you set). also the electronic solenoid will handle different conditiions better. the bleed value will spike in different weather etc, like if its a very cool day and its set to 8psi it may spike to 11psi whereas the electronic solenoid should stay at 8psi. of course this depends on the actuator fitted to the turbo, im assuming stock turbo here

 

if you want to look at an electronic controller check out a hks evc 3 or 4 or 5

 

i hope im correct with all that info :)

thanks for the help that was very helpful..i think ill stick with electronic boost controllers ...thanks

Link to comment
https://www.sau.com.au/forums/topic/50359-boost-controler/#findComment-1000786
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, wondering if the HKS bar and water reservoir still available? Thanks 
    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
×
×
  • Create New...