Jump to content
SAU Community

HELP!!! short circuit in r32 cd player install

Black Betty

By Black Betty,
in Car Audio & Electrical

 Share

Recommended Posts

Black Betty Community Regular

Black Betty

Posted
Posted

Hi Guys,

Ive shorted something in my r32 while trying to install my stereo, now my dash and instruments back lights and my tail lights don't work. i don't even get the beeping when you open the door with the lights on.

This is shit caus i work at night and i cant see how fast im going!!

SOMEBODY HELP ME PLEASE!!!!!!

CalaisT3RBO Community Regular

CalaisT3RBO

Posted
Posted

You have wired the headunit through your lights circuit by the sounds of it.

You need to disconnect your wiring and get a digimeter and put in correctly.

If your unsure of what your doing just remove the headunit. Replace the fuse you blew and get a car stereo place to do it.

I think the fuse your chasing is under the steering wheel.

Can someone add to this. Anyone know the wire colouring? I did mine months ago and my car is an hour away.

someonestolecc Grand Master

someonestolecc

Posted
Posted

heh hope you haven't wired "illumination" to the illumination LOL

I've seen that done before - it blows whenver you turn the lights on.

But yeah what has been said above I can't add to other than that (dont connect "illumination" to illumination).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Yes then it will turn on but I want the car features to work  
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      What about if you just give it direct 12v and earth?
×
×
  • Create New...