Jump to content
SAU Community

Recommended Posts

I am getting my car tinted next week and have a couple of questions.

I know that 75% fronts and 35% rears are legal, but I have heard from a couple of reliable sources that Regency will fail a car for having any tint whatsoever. This doesn't really make any sense, but then again I have heard so many stories about Regency that it doesn't really surprise me. What if I took in a copy of the legislation? Or would that just fire them up?

If I am going to be ****ed over for legal tint, I had might as well go 5% all around. Is darker tint more expensive than lighter tint?

Any advice?

Link to comment
https://www.sau.com.au/forums/topic/50710-tinting-and-regency/
Share on other sites

i have tint on my car mate. 35% sides and 32% back if i can remember correctly. There is no difference in price for percentage of tint, the difference is in the quality of tint you choose. I have endurance i think it was and it cost me $300 almost a year ago and is still at that price - my gf got same tint done as me at the same place.

yep its true been defected for having tint on the passenger and driver side window + at the same time a sticker on the front windscreen in the tint line, sent to regency for this i kicked up a fuss a the local cop station next thing ya know defect sticker off and no regency tour but the sticker and tint came off, next hour sticker back on(wasn't actually defectable) cop ona power trip next time go around the RBT

:confused:

Have you all been defected and/or ****ed around for having front window tinting? As long as it is 75% or higher, it's legal.

It's all here:

[b]Window Tinting:[/b]



44. (1) Glazing used in a windscreen of a motor vehicle must have a luminous transmittance of at least: 



(a) for a motor vehicle built after 1971—75%; or

(b) for another motor vehicle—70%. 



(2) Windscreen glazing of a motor vehicle must not be coated in a way that reduces its luminous transmittance.



(3) However, subrules (1) and (2) do not apply to the greater of the following areas of a windscreen:



(a) the area above the highest point of the windscreen that is swept by a windscreen wiper;

(b)the upper 10% of the windscreen.



(4) Glazing used in a window or interior partition of a motor vehicle must have a luminous transmittance of at least 70%.



(5) Glazing behind the rear of the driver's seat may be coated to achieve a luminous transmittance of not less than 35%.



(6) Glazing in a side window forward of the rear of the driver's seat may be coated to achieve a luminous transmittance of not less than 70% or, if another law of this jurisdiction allows a lesser luminous transmittance, the greater of:



(a) the lesser luminous transmittance allowed under the other law; and

(b) 35%.



(7) Glazing that has been coated to reduce its luminous transmittance must not have a reflectance of over 10%.



(8) The luminous transmittance requirements in subrules (5) and (6) apply to a vehicle instead of the corresponding requirements in the relevant ADR.



(9) In this rule:



"glazing" means material fitted to the front, sides, rear or interior of a vehicle, through which the driver can see the road, but does not include a coating added after manufacture of the material.



"luminous transmittance", for glazing, means the amount of light that can pass through the glazing as a percentage of the amount of light that would be transmitted if the glazing were absent.

That's stupid.

Maybe I'll get 20% all over and just remove the driver/passenger tints when I get defected. What does it cost to re-tint just these two windows? Am I right in thinking that Regency don't really check the rear windows?

If Regency ping you for tinting, do they send you home or allow you to rip it off on the spot and still pass?

guess the rest of the country must be driving around dangerously.. except for S.A.

as pretty much everywhere i know you can tint any of the windows except the front windscreen ..

why do you have such ****ed laws? why? why?? i thought S.A. was a laid back and easy going place. Why do you have laws that are more strict than anywhere else in the country? :bs!:

My mate has super tint on his 33, i mean on the back streets at night, like poorly lit street's you can hardly see out em....

Also i don't think regency will let you rip it off on the spot.....

I know plenty of people that have failed from window tint, you well get the big ol fail!

Then another trip back so they get more money and the possibility of a diff instructor so you could get raped again.

You must also have the little sticker on the window stating its transparency.

Even if the window tint is legal they will make you rip it off without that sticker. (This is what regency recently told me when I went though a big list of what I can and can't do)

Mine doesn't have the sticker.

The only car I've seen have those little stickers is my old mans old 80series Landcruiser and his new Nissan Patrol.

The Landcruiser was tinted from Toyota when they bought it.

The Patrol was tinted by Nissan.

I have approx 35% all round and its perfect.

At night I can see out of it perfectly. No reflections from interior lights etc.

My previous VS commodore was also tinted, for some reason interior lights would reflect and make it difficult to see out.

That tint was lighter than what I have on the line.

I put tint not to look 'cool' but so I don't feel like the sun is ripping apart my face on the drive home from work in peak hour traffic.

Front passanger and driver is defectable that is a fact. My installer emphasised this when i got my tint done but think about it, whats the point of getting window tint only on the back and rear quarters?. I use to wind down my front windows whenever i see the cops but now i dont care and even though ive seen them drive near me a few times, nothing has happened. Touch wood.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi guys my 94 r33 gtst fuel pump has gone out. I have a walbro 525 ready to go in but am unsure if I need to upgrade the fuel tank bulk heads? Ive heard that others have issues with the stock wiring melting... Ive seen alot of people recommend this: https://frenchysperformancegarage.com/products/fpg-nissan-skyline-r33-r34-silvia-s14-s15-billet-fuel-tank-bulkhead-hat-top-an6-with-high-current-connector-apex-2-8-delphi-fpg-100?variant=42873255198898 My current pump that stopped working is aftermarket but I had no relay mod or upgraded connectors. Need some advice please. TIA
    • It’s new. It’s the cd009. I did take the transmission apart to mill down the bellhousing and had both housings come off the gears so wondering is something isn’t in right. I am running redline. I can get it in gear running too but it’s just not easier and it’s almost like 2, 4, 6, and reverse all the back gears aren’t happy going in
    • I’ll remember that as a last choice. It’s brand new
    • Got keys and did a walk around the yard planning the landscaping works with the family that I will be doing Main effort: remove all the woodchip in the gardens that are around (attached) to the outside of the house and replace with 10mm blue metal, having woodchip close to the house is a recipe for inviting white ants, currently there are no white ants within the block and I would like to keep it that way I'll be buying some large raised garden beds to grow veggies and stuff, and the woodchip will be mulched with everything else that gets dug up, pulled out, or cut down during works Next will some minor drainage and landscaping maintenance up one side of the house, where the fuse box, AC, and solar stuff will go, about 12 mtrs long by 2 meters wide, I'll break up the soil, add gypsum and then I'll dig in a French drains about 300mm deep x 300mm wide and fill it with agg pipe and blue metal, then level out the whole area with a 50mm layer of blue metal, the soil, whilst currently pretty compacted, will break up well with the gypsum to aid in drainage, I'll then cover the area with a 50mm layer of more blue metal In saying this, the drainage issue is minor, but that little hidden away area down the side is untidy and weedy, and as all of the main elec stuff is there I want it neat and tidy to appease my OCD Again, the material excavated from the French drains with be added to the garden bed mulch, as will some rose bushes and some other crap looking garden plants, and a old apricot tree that is looking worse for wear The apricot tree is currently in a little roundish garden bed that is in the middle of the back yard with few other crappy looking plants around it, that will all be removed, levelled, re-turfed, and is a perfect spot for a hills hoist There is also a area about 3m x 2m between the rear fence and shed that will get some attention, it looks like some stuff was stored there and the grass is dead, that will also get broken up and mulched, and is a prime spot for a pumpkin patch I've guestimated that I'll need: 3 tonnes of blue metal, 12 meters of agg pipe, 5kg of Gypsum, and a hills hoist, so a few bags of concrete as well to set it in place (the house currently has one of those pull out 4 line jobs, whilst it works, I want a retro old school hills hoist), I am also going to run some chickens, there's a great spot for a coop, so a chicken coop to suit 4 of those lovely egg laying bitches will also be on the job card That should keep me busy for a while, and will finish off the back yard ready for a early spring planting of some veggies and berries  Once the main effort is done I'll start out the front, there's a large rock garden that could use some TLC, but that is only minor works Should be fully moved in within 2 weeks, the landscaping works will start then Fun times, retirement is good  
    • It happens, that's what your single stage filler is used for.  If it is still visible after the 3 coats of 2k primer, it will be visible after the paint is laid down.  Its hard to give 100% perfect advice without being there in person, I'm very tempted to say stop where you are, fill your pin holes with a single stage putty first then keep going. 
×
×
  • Create New...