Jump to content
SAU Community

Recommended Posts

Anything posted by an SDU (NZ) member on the MysFit Forums does not constitute the views of SDU (NZ).

Jon (Arithon) is working hard to get everyone back in the same boat and will not rest until the problems whether technical or people are weeded out to make the SDU forums a better place.

Jon is receptive to input on these issues, please leave him a message on the SDU forums if there is anything you can suggest. Everyone has pretty strong emotions and opinions as to the future direction the forums should take.

I understand the NZ exec are having a meeting on Wednesday (5 June) to address the issue of the forums. I keenly await the outcome.

My plea is that we should avoid pouring more petrol on the fire for the moment. I'd like to keep the option of a friendly and constructive relationship between the Australian and New Zealand camps...

Link to comment
https://www.sau.com.au/forums/topic/514-sdu-nz-a-plea/
Share on other sites

My plea is that we should avoid pouring more petrol on the fire for the moment. I'd like to keep the option of a friendly and constructive relationship between the Australian and New Zealand camps...[/quote:0072d479b6]

graemewi, i have mixed emotions on this.. i am very angry with the way myself and other's have been treated by sdu.. i myself was singled out by a couple of the mods for having opinions and also apparently put on a "to be banned" list.. now tell me how do u expect me to react to u guys now??

however i am not one to hold grudges especially when not all sdu nz member's think what happened is right.. i do have some hope that one day things may be patched up.. all i can say is i hope we dont make the same mistakes as u guys have over the last couple of months..

Link to comment
https://www.sau.com.au/forums/topic/514-sdu-nz-a-plea/#findComment-13054
Share on other sites

[RYAN]

I deleted your post as all I saw it achieving was provoking another slanging match which none of us want.

Nismoboy

[RYAN] want devulge the reason. But theres a thread in the wastland section where he can do it.

Urmine

Thats because you and Onarun challenged the mods authority and they didn't like it.

Hopefully we do learn from the mistakes made by SDU, it will make our task awhole lot easier. But with every club/business etc there are growing pains, good times and bad. Its how fast and well the club/business recover from the bad times that will show how successful they are.

Link to comment
https://www.sau.com.au/forums/topic/514-sdu-nz-a-plea/#findComment-13055
Share on other sites

Anything posted by an SDU (NZ) member on the MysFit Forums does not constitute the views of SDU (NZ).

[/quote:dde7c90e68]

never fear Graeme. none of us will judge the collective based on an individuals actions.

appreceate what you are trying to do and i want to thank you. :(

keep up the good work.

Skyz, when did i challenge the mods authority? i think i might have said something that upset them but i never challenged them.

Link to comment
https://www.sau.com.au/forums/topic/514-sdu-nz-a-plea/#findComment-13057
Share on other sites

Guest Impul 25T

I thought there only one the moderators had a problem with at the time, and that was only because of a few smart comments. Just remember, they, like the moderators here, were/are only doing what was set by a higher order. They can make mistakes, but also remember in the context of a discussion forum, it is better to err on the side of caution.

Link to comment
https://www.sau.com.au/forums/topic/514-sdu-nz-a-plea/#findComment-13058
Share on other sites

well maybe thats the difference.

you made a mistake there saying that the mods here do what they are told to do, because all of the moderators (bar 2 or 3) are all admin's of this site and the backbone of the new club... we moderate it very lightly at the moment also because we haven't actually set a terms and conditions for people to abide by.

Christian

Link to comment
https://www.sau.com.au/forums/topic/514-sdu-nz-a-plea/#findComment-13059
Share on other sites

Guest Impul 25T

OK. I apologise for that.

It may have something to do with the just over 250 members here, and the little over 2500 there. More people makes for a bigger mess. I'm sure if it isn't nipped in the bud here, there will be a call to get tougher. It is inevitable. As your population grows, you get more and more who have nothing better to do than to cause problems, it just happens. It's just part of being a human.....

Link to comment
https://www.sau.com.au/forums/topic/514-sdu-nz-a-plea/#findComment-13060
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...