Jump to content
SAU Community

The time has finally come... *cefiro owner*

someonestolecc

By someonestolecc,
in Four Door Family & Wagoneers

 Share

Recommended Posts

someonestolecc Grand Master

someonestolecc

Posted
Posted

WoOt!

I have a ceffy parked in my driveway!

It is, infact Meggala's sr20 powered ceffy.

I love it.

Please say gday to me at track/cruise/circuit days and help me out with my drift techniques :D

I'm just looking a putting a few personalised touches on the car and should be in full swing weeeeeeeeeeeeeeeeeeee!!

If anyone is interested the one I was originally going to buy Meggala still has - and boy at stock boost gooodddd dammnn its driftable...but thats a different kettle of fish!

anyone else here have a sr20 powered ceff?

someonestolecc Grand Master

someonestolecc

Posted
  • Author
Posted

Thanks alot guys. Steve reaklly did build a heck of a nice car.

I hope he won't mind me changing the character of it a little - I will be aiming to make it street/drift car. ie. car with a stereo and some nice looks that with some smaller wheels, the subs taken out etc can be drifted/circuit assault a track.

Obviously it won't be as good a drifter if I made it just that, nor will it be the cleanest street car if I just went that way either - but hopefully I'll be able to walk that fine line between the two ok.

It's actually not making a HEAP of power anymore - it's been set to .8-1bar of boost. This is plenty for now for me... I've already lost it trying to induce powerslide without enough throttle control - ended up 180'ing the 'corner' (i.e. obstacles) - this was on private skidpan.

My point is it was easy enough to do. So I think I will just keep it as is for now.

I'm having a few problems switching cogs at the moment which is what i'd really like to perfect..

Usually by taking 2nd out to put into 3rd = 2nd comes out spinning too hard and 3rd just grinds... same happens when punting into 2nd or into 4th.

This means any 1/4 mile assault is out for now :

Any suggestions would be good.. - oh shifting lower (alot lower) and double clutching result in sweet changes.. Unfortunately at the loss of some speed.

I'm starting to wonder if it's possible to just whack em in like the rb boxes or could it be the gearbox needs new teeth? (we've all seen meggala's vids :D)

inark Grand Master

inark

Posted
Posted

yeah they should be V mounting their bloody coolers!!

no one has caught on it yet...

less piping = less lag

plus at least then u can put on a carbon/glass or just vented bonnet and hacve a real reason unlike 90% of the wankers out there with one :D

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
Inark........could you possibly draw a pic of the V mounting positions? I have an SR20 ceffy also and would like to explore this "less lag" idea.

Nico, have a read of this... http://www.skylinesaustralia.com/forums/sh...ead.php?t=51234

But is the sr20 in the orange one? Or is the another one???

someonestolecc Grand Master

someonestolecc

Posted
  • Author
Posted

If I had cash to splash i would V mount for BLING factor... I'm not sure if it would less lag<< does it really make it that much different?

Anyway.. I took the day off work and spent ALL day to take my door trims out and put sound deadening in.

It doesn't quite look like http://www.fastfoursforumscarclub.com/temp...interest_62.jpg but uhhhh.. it's my first time.

I will post pics of my install efforts along the way - although I'm too tired right now (will post tomorz).

I'm fitting 6.5" splits in the front and I've come to the conclusion ceffies are great for installs.

I took out the standard speaker mounting bracket and just cut out a peice of mdf to sit on top of the door. I will then purchase a spacer so it may sit properly.

I have the dimensions of the cutout if anyone would like to install their own speakers in the front of the ceffy. It would be pretty easy but for the fellow ceffy community I can-

1. give you the dimensions (will measure upon request.. otherwise cbf)

2. cut you out a peice and send it to you (you just drill on the marked spots.. or if my mate wants to drill em they will be pre-drilled) (you pay postage and whatever the mdf cost.. i think like $2-4)

3. forgot option three but i thought there was one..

Also if anyone is doin an install lemme know I'd like to swap tekneeKS :mad:

someonestolecc Grand Master

someonestolecc

Posted
  • Author
Posted
Pics of mine:

Mate lovely.. there is SOOO much room in the engine bay it's almost strange isn't it?

Plenty of room for a CAI induction setup and an oil cooler!

Have you gotten your tacho giving you the correct rpm? I'd like to know the resistor to fit and where to fit it if it's possible?

its going to be in an up comming HPI isnt it?

Ask meggala I think it's drift battle mag.

inark Grand Master

inark

Posted
Posted

the further air has to travel the longer it will take... the less piping the less u lag u should get (im guessing) and also i would have to assume having less distance to travel it would be less likely to heat up in the enginebay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Oh, also, forgot to add these photos I believe.
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...