Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Hey Guys,

Well i took the car to Bel Performance and im VERY happy with the results, they're a very switched on bunch of people and basically got to work as soon as i rolled in, They could tell how the car performed just looking at it! They do a road tune so not sure on the exact figures but its quick! The front of the car lifts off in first and second, and i chirped all 4 tyres at around 60ks without even meaning to.

Strongly recommend these guys!

is your car yellow ER3498GTT getting a RB26 put into it?

I've only seen 3 r34 GTTs in Newcastle.  The Black VNOM one, a Yellow one @ pulse, & a silver one pulled over right next to Beaumont st in the mornings sometimes.

Yeah geno8r my car is the yellow r34 at pulse....and yes...she is getting the RB26 in hehehe

Yeah geno8r my car is the yellow r34 at pulse....and yes...she is getting the RB26 in hehehe

Nice :D Josh & Luke are kool there hey... I think i'm gona go down the drags with'em in a few weeks, I'd ask ya to come but your car isnt ready. When do you expect it to be ripping up the roads anyway?

Nice :D  Josh & Luke are kool there hey... I think i'm gona go down the drags with'em in a few weeks, I'd ask ya to come but your car isnt ready.  When do you expect it to be ripping up the roads anyway?

Well...got the motor sorted....almost got turbo's sorted....plus a few other bits gotta get over the next week or 2....i'd say maybe around mid november. dun wanna hope for sooner....rather be pleasantly suprised. Still trying to get rid of me other parts....that would help lol

  • 3 months later...
Well...got the motor sorted....almost got turbo's sorted....plus a few other bits gotta get over the next week or 2....i'd say maybe around mid november. dun wanna hope for sooner....rather be pleasantly suprised. Still trying to get rid of me other parts....that would help lol

So how did your car turn out?

Hunter Thomas Automotive in Moate st Georgetown (just around the corner and up the road from pulse performance, how long has that been pulse for?? last time i went past there it was Impact Performance)

ask for Paul Thomas, he is the man, he is a direct distributor of HKS and Apexi. he knows his stuff. a mate of mine just got his Power FC tuned for his 180sx, he dropped it off on monday, PT checked it over, road tuned it, then took it down to sydney for dyno tuning, he picked his car up from PT on Thursday.

he doesnt advertise, only word of mouth. he has a standard looking maroon R32 GTR but my god, its crazy, he is also the nicest guy.

give him a call 49681362

anyone who has been there speak up, i know noone has a bad thing to say about him.

cheers

Linton

it came to just under $3000, but that was for a full service, road tune, then the coilpacks played up, so there was some diagnostic time aswell as a set of Splitfires and then the dyno tune, i think the tune was $850.

i installed all the hardware into the car myself, then he took it down to pt for tuning.

240rwkw, HKS GTRS, HKS 256/264 cams, Nismo 740cc Injectors, Z32 AFM, FMIC, Full Exhaust, Power FC. very good result. also run a 13.2 with loads of wheelspin through 1st, 2nd and most of 3rd as it is more a drift car.

my cars yet to be taken there.

cheers

Linton

me.....FMIC, turbo back 3", thats about it really, 13 psi boost, wanna bigger turbs but i'm back to uni so the budget is now going to be tight.........(read: sucks arse) might start selling drugs for some more income or sumthin, maybe take to organised crime

got PFC installed today, only got a quick tune, its running ok for now, though its running 14 psi (approx) and i've seen 99.6% injector duty so might be bringing the boost down a tad for now, don't want that causing any problems nad yeah idling a tad high, does anyone know where i can get an english copy of the PFC manual for an r33 gts-t s1.5 (series one i spose)

  • 1 month later...
Guest two.06l
oh yeah dyno tune soon, needs new timing belt and radiator flush first, might get a cam geaer at same time.... anyone wanna lend me 2g's ???

we have just opened our new workshop at port stephens... check us out at www.dpsmotorsport.com.au or pm or email us at [email protected]

  • 1 year later...

Ok, I Need to get a 100k service, it seems my mechanic is just too busy to do it so I might be going else where this time. 'Personally' I think the job scares them because it requires quite a few parts for an import & they don't usually do that.

Here's my list I'll present to workshops (after you recommend some to me in Newy :P)

100k Service

1995 Nissan Skyline R33, GTS25T (gts-t)

1) Replace Timing belt and ancillary belts (cam, drive, etc.)

2) Change oil and oil filter

3) Coolant system air purge

4) Replace fuel filter

5) Replace spark plugs

Replace Water pump

Replace O2 sensor.

Change Brake & Clutch fluids.

Change Gearbox oil to Redline Lightweight 4L, around 3.7L used.

Change Diff oil to Redline Heavy, 1.5L

Install oil catch can.

Replace Idle bearing and tensioner

Check throttle body / plenum for residue.

Check steering, car pulls to the Left due, the arm underneath may not be in align, was aligned before but not done correctly.

Odometer isn’t working, hopefully just fiddle with it to remove any dust / dirt stopping it.

Exhaust manifold gasket may be needed.

Parts needed:

Nissan timing belt

Ancillary belts (alternator, water pump, cam, drive, etc.)

Oil and oil filter

Coolant

Fuel Filter

Iridium Spark Plugs

NSK bearings

O2 sensor

Any workshop suggestions, What's that one called denhams, danihams, something like that? I don't really want to go to a strictly 'performance' shop because it's not performance work, its just plain old mechanical work, just with jap parts :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...