Jump to content
SAU Community

Charcters on JDM plates?????????


Recommended Posts

Could someone please tell me what the character on the left of the numbers on Japanese rego plates mean?

I understand that the characters at the top of the plate denote the prefecture, I am simply curious what the single one means.

Thanks

ps. I put it here cause i figured you people living in Japan would know best......i apologise if this is not the appropriate place for this thread.

Link to comment
https://www.sau.com.au/forums/topic/52231-charcters-on-jdm-plates/
Share on other sites

So it has no reference to vehicle type/mass etc?

Means nothing then?

that's the top numbers your refering to

- 500 (used to be 5x): depending on engine capacity, car weight and width which I don't know exactly but don't really care. As an example: most small sedans/hatches, coupes like integra, silvia, celica, roadster MR2/S, roadsters etc...early skylines, chasers, evos, sti, rx-7 I believe are in this class too.

- 300 (used to be 3x): same as above but larger, heavier class...NSX, Supra, GTO, GT-R, RX-7, Evo, Z32/33, RX-8, Chasers, Skylines, Stageas etc

- Yellow plates: kei plates... I don't take note of the numbers.

- 400: lorries, special vehicles

- 800 (used tobe 88): marked police cars and emergency services ambos, fire brigade

that's the top numbers your refering to

- 500 (used to be 5x): depending on engine capacity, car weight and width which I don't know exactly but don't really care.  As an example: most small sedans/hatches, coupes like integra, silvia, celica, roadster MR2/S, roadsters etc...early skylines, chasers, evos, sti, rx-7 I believe are in this class too.

- 300 (used to be 3x): same as above but larger, heavier class...NSX, Supra, GTO, GT-R, RX-7, Evo, Z32/33, RX-8, Chasers, Skylines, Stageas etc

 

- Yellow plates: kei plates... I don't take note of the numbers.  

- 400: lorries, special vehicles

- 800 (used tobe 88): marked police cars and emergency services ambos, fire brigade

from what i heard here's how it goes, 2.1 liter engine and below is 500 plates, 2.2 and above is 300 plates, bus and trucks are 100. my wifes prelude is a 300 plate because its a 2.2 liter engine. thats the reason why r32 gts-t's and gts-4 has a 500 plate (and thats how u can tell if people just slapped in a gtr badge hehe).

the letter beside it doesnt really mean anything, except for us which is Y or E or A, which denotes (supposedly) tax free (but we still pay for it though, because the base commander "insist"). :bs!:

Yukio, as I said any of 3 main criterias I mentioned and also a few other things.

My Evo and a s14 are both 2.0L and have 300 plates...s13 and S15 are 500 plates...but it's no big deal. As you said only makes it easier to spot posers...but then I have seen RB26DETT in HNR32 with 500 plates.

Good that you mentioned it, I forgot about the 100 plates.

Also plates with a red diagonal line across the plates are dealer plates.

i think so too, but coz us here on US base we have different coding just to make it less complicated, they made it simple, yellow plates and motorcycles pay 3,000 yen, 500 plates pay 5,000 yen or some small number like that then 300 plates pay 19,990 yen then 300 plates with 4.5 liter engine and up pays 47,000 something yen for a year.

I thought the numbers, which denote tax code (right?) are also determined by the weight of the vehicle?

From what I have observed I think 300 plates are starting from 2.0L up capacity, 1200kg+ weight and 1700mm+ width.

Because the early Evos and WRX meets all of the above except for width and they are 500 plates...or the old 7x plates.

Justin I don't think the 1 has any significance, more they ran out of possible plates and just tag the additional digit to it....

I think the basic numbers, 1, 3, 5 etc are used and then each prefecture can add numbers after that dependening on needs...

so a 55 code is the same as a 500 code since they both start with a 5.

Over here in Yamanashi I've seen 55 / 500 / 501 / 33 / 300 / etc

One question - what the deal with a Kei car that has a black plate with yellow writing...not a yellow plate with black writing. Seen a couple about but could never figure it out.

One question - what the deal with a Kei car that has a black plate with yellow writing...not a yellow plate with black writing. Seen a couple about but could never figure it out.
Aaaah, I could be mistaken, but I remember someone saying the black plate with yellow writing is registered as a commercial vehicle...

as for the 5xx etc numbers - I asked that question at the dealership - was told that only the number of digits and the first digit are important - and that you could, in fact, choose the other digits if you liked

it was a 50:50 japanese/english conversation - it sounded a bit weird to me, so not sure if something was lost in translation

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...