Jump to content
SAU Community

Recommended Posts

i am wondering if the fuel efficiency of the car is much better if u set the boost to the minimum ... i find i'm using way too much petrol ... i don't know how much yet exactly my milage is yet but i'm pretty sure its not very good ... i'm wondering if its better to put the boost down if i wanted to go further ... and also any other tips on improving the mileage without any really big major changes to the car??

Link to comment
https://www.sau.com.au/forums/topic/5256-feul-efficency-and-boost/
Share on other sites

Hi hippy.

I am interested in this as well. The first thing is to ensure your engine is in good mechanical condition, do a compression check.

Second thing is make sure it is tuned properly, and that everything is working. When was the last time you changed the spark plugs ? is the oxygen sensor actually working ?

Third, look at the whole car. Tyre pressures o/k, handbrake not dragging ? do you carry around a lot of heavy junk in the boot that you dont really need?

Lastly and most importantly is how you drive it.

well i've not had the car for very long at all ... a month or so ... its an auto so i've got overdrive on and i have what i'm pretty sure is a boost controller knob ... and i usually drive with the knob set to minimum ... and i must admit i do drive it pretty hard at times ... but mostly i try to drive with it in the lowest revs possible ... i do plan to get a check up on it soon ... what tyre pressure do u guys think i should be on considering that they are the standard 16's ... i've also got stock turbo/IC ... full 3" exhaust (i think) and hi flow air filter.

thanks again

yeh make sure tyres are at 32psi or whatever the manual tells ya. this will have a diff on mileage. if your engine is fine, the only real way to get better mileage is to modify your driving

also getting the AFs checked could be an idea. nissans run rich as std (for reliability rather than performance) so you could get a second hand AFC fairly cheap and lean out the AF mixture. this will give you better mileage and more hp

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...