Jump to content
SAU Community

Recommended Posts

When looking at the imports I was asked if I wanted to look for a modified GTR or a stock (basically what I was looking for).

I said a clean, stock R32 GTR with a solid service history, etc. would be ideal.

What are the pros/cons of going with either? I had my reasons for going with a clean stock one but I'm curious as to what everyone is thinking and why.

- J.

Link to comment
https://www.sau.com.au/forums/topic/53334-r32-gtr-buy-modded-or-stock/
Share on other sites

I thought that too...i wanted a stock GTR.....but then i realised, stuff that, i'll pay a lil extra and get a modded one. You can save money. But then again, you could be buying a lemon. Your choice really.

I bought a modified one and havnt looked back. I was lucky enough to have an ex aussie contact in japan who inspects the car before buying it. I also got all the reciepts from the workshop that did the mods, which told me exactly what was in the car and how much the previous owner spent. Maybe i was lucky?

I'd take the stock, because i don't want to miss the experience of modding youself and slowly feeling your car perform differently. I think that's part of the fun in buying an import

I think that i would appreciate it more as well. Just make sure your importing under the 15yr rule, otherwise youll be in for the big $$ when it comes to compliance time.

im also planning to import an R32 GTR with the use of the 15 year rule (if it still exists by the time i decide to import). I think a nice stock car with a complete and consistent service history is most important for me. Id rather have a car with medium k's done but with a full service history than a car with low k's but no logs at all, most brokers do decent checks about the condition of the cars to make sure they coincide with the k's shown but you can never be 100% accurate.

Get a nice stock example, if its in excellent condition with low logged k's its worth the extra couple of grand in my opinion.

Definitely go modded provided you get it checked out by a specialist. While it may be fun doing the mods yourself, you'll be digging deep into your pockets if you go down this track not to mention having your car off the road for a considerable period of time. I've just been down this route & if I had my time over again I would have bought a modded one & saved heaps of $$.

i got a stock one, mainly cos i couldn't afford anymore (oiginally going for a cefiro)

but if i did have the money, i think i would do the same because theres more chance of buying a lemon

but anyway i'll be able to say in about 5 days if it was a good idea or not cos thats when it lands (about bloody time).

slapperIf you go down this track not to mention having your car off the road for a considerable period of time. I've just been down this route & if I had my time over again I would have bought a modded one & saved heaps of $$.

Thats not as bad as being down the engine rebuild road :uhh:

I'd Go the stock GTR then you'll have a more reliable car and can save for modifications later. - Time of car off road maby a day or two getting a work shop doing it. - Lots of fun and you can learn lots if you do it your self.

Modified GTR as others have said you'r running the risk of getting a thrashed car and it going bang on you. - Time of car off road, New pistons and what ever else you want, at least 1 mth + but thats if you have the money ready to go. Other wise you'll be saving for a lot longer, you get the idea! (money wise you looking at around $4000min forged pistons + head gasket + oil + oil filters + machining, Balancing & labour etc. Now your back at square one with the same engine just stronger internals. - No fun in modifying and you dont get to feel the performance power gains as mentioned above.

But you could get lucky and get a genuine modified GTR. - You'll have a hard time finding a good condition 1989 mld R32. If anything I'd go 1994 mdl R32 :P

Your decision. :Party:

:P

Jun

Go the modified one. You'll find that most of the parts on an old performance car like a R32 GTR are old, frail, and break. At least one that modified properly will have these parts already replaced. But its hard to find that. I've spent a fair bit of money replacing old parts on my GTR and its money you'll never get back considering the resale and that people can't see through the price at a well prepared package.

I got mine for a lil bit more than a good stock example ($1K-$4K) but picked up about $14K+ worth of aftermarket parts:D go the mod's... unless you are really rich and want to spend about the same amount as the car on mod's (would most probably be much better when finished also)

This can also depend on what type of modifications you wish to do to the car or what you want the car to have, and what the car coms with.

If it comes with turbo upgrade, bigger fuel pump, aftermarket ecu, boosted lots etc. - Then its deffiently been thrashed.

If it comes with, Pod filters, Suspension, stock boost, Exhaust, Rims, BOV then it shouldn't be too bad won't be thrashed as much and internals wont have had as much ware.

:P

Jun

Thanks Ferni... :P I know we've talked about this one already... heh.

This can also depend on what type of modifications you wish to do to the car or what you want the car to have, and what the car coms with.

 

If it comes with turbo upgrade, bigger fuel pump, aftermarket ecu, boosted lots etc. - Then its deffiently been thrashed.

 

If it comes with, Pod filters, Suspension, stock boost, Exhaust, Rims, BOV then it shouldn't be too bad won't be thrashed as much and internals wont have had as much ware.

 

:(

Jun

I suppose at the end of the day it comes down to getting the car checked thoroughly. Most of the ones I was looking at have aftermarket pod filters, suspension, rims, the odd one has BOV, etc.etc.

A couple have got aftermarket computers and new turbos.... I'm steering clear of those that look like they've modified the turbos for the most part for that reason although I will inspect any GTR that looks reasonable. Cost is the number one prohibitve thing for me right now anyway.

- J.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...