On the road finally + Tech docs for Bris members

[Niss_Fan]

Got the car back on Friday and so far i am pretty happy. Got most of the mods done that I wanted and will be doing more next month. So far the project is at this stage :

Huge service!! Replaced most hoses, belts, lines, fluids etc.

FMIC - full polish

Custom dump and high flow cat connected to a Nismo zaust.

GTR fuel pump and 550cc injectors

Power FC install and tune

New pads and disks machined all round

4 new tyres ( go on next sat)

apexi auto timer (intall next sat with new stereo)

Bit of electricle work still to finish once parts arrive (recalabrate speedo and dash tacho)

Before all this it ran like a dog .. was getting done by 85 lasers :-)

Now without playing with boost (it's at 8 psi) I get 185 kw at wheels. Next step is swapping my monza blowoff for a GFB stealth (neighbours already pissed with noise). Also getting a box made up for the pod filter with some cold air fed in. AVCR is going to be installed and then boost stock turbo to about 12psi. Should do over 200 at wheels I hope.

Saving atm for a GT30 turbo with external wastegate. This I hope will put it at around 260 kw. Already thinking about the engine rebuild but will have to wait and see how the minister for war and finance is about the next bill :-)

Give me a wave if you see me... cars a very yellow R33 with GTR kit and white leather interior.

Now for tech docs.... with all my searching I have managed to collect a few docs for the R33. Included is an R33 english workshop manual, wiring diagram, ECU pin out diagram, guides for dash removals and stereo installs. Alot of people look for this information and some charge for it. I am happy to burn a copy of this onto CD if any of you guys want it. Just let me know and I will get a copy burned. I am on the southside and happy to meet peeps (lol within reason). Will do the CD for either 50c or a blank CD.

catch you guys out cruising.

[jaqule]

WOW sounds hot , I had a custom box made up and sent over from Perth , same as Pred ( he has since sold his line ) there was a group buy a while back for $160 , good fit and does the job , but you will have to self modifiy to fit non stock IC , I hear it works well with cold air pipe and insulated lining around the inside of the box ( have yet to do this myself , on to do list)

[51jay]

Is the R33 workshop manual for the GTST or the GTR and is it for the whole car or just Engine. Car sounds nice ...might see you at QR some time.

[Niss_Fan]

The manual is the R33 Engine Service manual for the RB20E, RB25DE, RB25DET and RB26DETT. It covers engines, drive train, Specs and electrical (It's 491 pages) . I have the colour car owners manual too but not scanned in. This one covers everything else you would expect ie: radio, dash internal electrical, fuse location etc. If anyone has questions let me know or if you need a few pages I could scan them in (I'll get round to scanning in the 150 pages one day).

jaqule

I'll let you know how my the custom box turns out. being made out of stainless and will have top plate that can be opened for easy access to the filter. Will also be using the old hole that the stock intercooler pipe entered engine bay as the feed for coldair pipe. Will look at insulation inside too. The fitter who did my intercoller did a very nice job and he will do this too. Can't wait.