Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Ok time again for an updated picture. I have recently had the cam covers and inlet manifold powdercoated, turned out pretty good i think. The black cover in the middle has still only got a cover of primer on it so it'll look a little better in a few days. I have actually cut out the raised nissan emblem that was in the middle of this and filled it over with fiberglass.

DSC02181.jpg

The Turbo kit i got i purchased off a fellow forum member, "Steve". It's a HKS 3037 + HKS wastegate but locally made manifold and dump pipe. Think i paid about $4000 for it all including intercooler piping and oil lines.

It was his original forum thread that convinced me that i needed the 3037 and when it came time for me to actually purchase one he was returning his car to stock, so i purchased his complete setup.

Not too much longer i hope, it has taken me 2 years to get to this stage. Just need to find the time to get the engine back in. Both me and my old man have a couple of weeks off over christmas so hopefully i'll get 99% of it done then.

No idea why steve returned his car back to stock, you'll have to ask him he's still on these forums.

  • 3 weeks later...
  • 1 month later...

I've really only got the intercooler piping left to do. I had been waiting the last month for a trust blow off valve to arrive from nengun and that finally arrived this week. On saturday i'll go see what piping/bends etc that i need and hopefully i can find the time in the next couple of weeks to get that made up.

Edited by B33st
  • 1 month later...

Have not had much of a chance to do a whole lot in the past few weeks. The intercooler is mounted and the pipe is all cut to size just need to get it welded up. I also need to get a new hose made up for the air con as it current one fouls on the exhaust manifold.

I'm off to VIC for a couple of weeks from tomorrow (grand prix and fishing trip up the Murray) and then hopefully i can get stuck into the last few things when i get back.

I'll post as soon as some more progress is made.

I went with him as previously i was getting most stuff done by Hardcore at slacks creek and i found out that he was the one that was doing all the headwork / machining for them so pretty much went straight to the source. He's pretty well known in drag racing circles and has been supercomp champion a few times now racing his own cars, you'll see his name across the top of the main stand at willowbank.

HARDCORE "PERFORMANCE"???? *shudder*

Mate, my advise is to stay away from Hardcore, unless you want to buy something like a tacho or a blow off valve. In the few times i've been there where i had a leaking intercooler (which i knew because it was prone to that), and took my car in to fix that and only that. I had a subzero plenum on it, which they tried to tell me the runners werent sealing properly and re-welded without asking, and said it fixed the problem (which it didnt), then got the suprise of having a coke bottle stuck between my intercooler and bumper (which they treid to convince me they didnt put it there), add to that an undone throttle cable which got stuck half open when trying to test to see if my intercooler was fixed, and a fuel rail which wasnt done up and p!ssed fuel everwhere (which they told me it was done up really tight, and must have a problem with the thread!), and luckily enough i was stopped by a pedestrian before i left who pointed the leak out to me.T

The mother of all has to be a squashed by them sump because they thought its a great jacking point... this lead to an oil pickup problem, which subsequently led to a big end gone 5mins after leaving their shop whilst i was going up moss st, testing my to see if my still cracked intercooler was fixed (which you've already figured it wasnt)!

To top it all off, i took the car back and it went up on the hoist, and they found this mysterious crack in the cooler, which they tried to tell me it wasnt there before (even though i only drove the car for 5mins).... If thats not enough, when i told them about the sump, they denied it, even whilst having a squashed pickup in my hand!

This isnt the first story i've heard like that from that hell workshop. Dont say you werent warned about them... they're dodgy as they get, and not worth the money you save by seeing them. Steer clear!

EDIT - they also tried to tell me that they fixed my intercooler leak (which was aparantly pressure tested!), and that the ecu needs to be remapped because it was mapped with a leaking vacuum hose! Its a beyond a joke, and im still rebuilding the engine because of this crap.

Edited by Cool Hand Luke

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...