Jump to content
SAU Community

Recommended Posts

I run the Sumituno HRZ 11 like your saying. With a bit of heat for track work there not bad, (1.94 60's), and i know a quick VX that runs quick with them as well. But now with more power they still spin alot, so i'll be trying a different tyre next time. Im purely going for traction. Maybe i have too much power that ant street tyre will not hold the rear end down, i dont know until i try i guess. But first gear is a joke now!!

who makes these nankang tyres they seem to be popping up on a lot of imports in some of the yards here in wa. They seem to be pretty cheap so I would think they would be pretty nasty but some other peoples input would be appreciated

I can't vouch for most of the other tyres but I can tell you a fair bit anything with regards to Falken's ( which are made by Ohtsu ( who are now in bed with Dunlop ) , not Sumitomo ).

I've had ( and many friends have had ) ZE326, ZE512, ST115, FK451 and AZENIS.

Everyone says ZE326 are crap. Well what do you want for that kind of money ?? They're an entry lever tyre with a large range of sizes at a low price. Mostly for those who can't afford the 20 inch wheels they purchased let alone the rubber to go on them :)

I'm currently using ZE512's and they are a pretty good general use street tyre with silicone impregnated compound so they hang on reasonalby well in all consditions and are quiet. Also, they're directional which the ZE326 are not.

From this point onwards they get more type specific like FK451's for Euro conditions etc up to the AZENIS Pure Sport which is an awesome tyre on the street under most conditions and not too bad on the track days ( for the price ).

Not that I'm saying Falken are the best, because I'm not, but what is considered shit to one person is considered a good comprimise to the next person. You guys should consider siting actual event's that contribute to you either liking or hating a tyre ( like poor wear rate but good traction etc etc ) instead of just saying they're crap. That doesn't really help anyone. :)

I also have ZE326's on my R33 (came with the car) and they're pretty average...I'll definately be steering clear of them in future and I wouldn't recommend them to anyone.

I can vouch for what silva33 said above, I've got 255/40/17's on the rears and despite that, they are shocking in the wet and spin even at low rev take offs.

If you want another alternative, people on the board have been happy (including myself) with the Hankook Ventus K104s. Excellent for the price, and if you do a search, they do hold their own against the competition in the last MOTOR mag tyre shootout. From the figures, the K104 does do a admirable good job. The FK451 did even better. Sorry but I dont have any info on the sumitomo besides this survey in EVO Magazine (best to worst);

1) Goodyear Eagle F1 GSD3

2) Toyo Proxes T1-S

3) ContiSportContact2

4) Michelin Pilot Sport

5) Dunlop SP Sport 9000

6) Pirelli PZero Nero

7) Bridgestone S-03

8) Hankook Ventus Sport K104

9) Yokohama AVS ES100

10) BF Goodrich g-Force TA KWD

11) Firestone Firehawk SZ50 EP

12) Kumho ECST Supra 712

13) Sumitomo HTRZ II

hi, guys just thought i'd add some comment to the tyre debate.

I am getting F1 gsd3 for my Gts4, they are only 205/55/16 and are a bargain at moment with buy 3 get 4 at goodyear on now.

I noticed that falkens cheaper tyres are getting quite a bagging, but I think some of the people here have got the wrong size tyres on their cars.

I've got ze 502's (205/55/16) on at the moment and they have been a pretty good street tyre, even taken them out to qld raceway where they performed quite well, although they were a bit twitchy - something that never happened on the street with them( not the heat that a racetrack causes). They did let go but were progressive so the car was still controllable with the throttle. If you see the reviews on this tyre it comes out some where near the bottom of most lists, it cost me around $130 each when i got them. In the wet they have been pretty good, can drop the clutch at 4k and get only mild wheel spin.

This i think is partly due to the near stock tune of the car but is also due to the Weight going onto each wheel .

If you look at the original tyre size on a GTS25T I think you will find that it is no where near 255. Wide tyres work great on most cars in the dry, but they are more likely to kick your ass in the wet without the right weight on them. They only ways to get around with 'wider' tyres in the wet is to buy tyres with a more grippy compound or better tread design which you dont get with low/middle range tyres OR to increase the weight on them e.g. a bag of sand in boot ...! or put on an aerodynamic body kit that puts a tonne or two of downforce on the car e.g. Formula one.

If you are having problems with 'cheap' tyres in the wet, try a smaller width in the wet months, you will probably find that even most cheap tyres these days are better than those that were middle of the range or better when our skylines first came out so they will perform better than you expect.

Ive decided to see how a 'top' of the range tyre goes on my car with the F1 GSD 3, as the price differential to the tyres like my ze 502's is eliminated with the the deal they are running. The reviews on the net seem to be very positive so it will be interesting to see how they stack up on my GTS4. $640 for a set of mid range tyres versus $745 (usually $1000) for a set of 'higher' end tyres makes the gsd's to good to pass up. Ive always used lower end tyres and found them ok, but i never tried large tyre sizes because a good large tyre has always been to expensive to justify.

I've had the following on my car:

GT Radial champiros 55 (205/55/16) - they were very good in dry and wet although they got a bit slippery in the wet before they got to the wear indicators. used at lakeside, pumped upto 40 psi, went very well at track, got a 1 min 7 on 2nd outing.

BF Goodrich radial TA's (205/55/16) - good in the dry .good on the rears in wet but front understeered in wet ( fronts slid a bit). pressures were good too.

Falken ze 502's (205/55/16) - good in dry and wet. good steering in wet, not as good as goodriches on the back in wet. Twitchy on track(qld raceway) once heat built up, but still let go progressively.

all of the above prob dont have good reviews any where but are quite good when they are matched to the weight of the car, power of car and not forgetting skill of driver.

I've got a set of sumi's and they're not real flash in the wet... but I haven't used falkens, so I don't know what they're like...

I drove a mates GTR recently, and he had a set of the silica tread Hankook Ventus K104's on and they were excellent, probably the best value for money around but not the best.

With anything these days, you pay for what you get.

Happy hunting...

I agree the Hankook Ventis K104's are awesome tyres and are the best value for money you will get. Their only downside is they are a little skatey in the wet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...