Jump to content
SAU Community

Recommended Posts

Hi Everyone!

We are a new sponsor/trader on SAU given the go ahead from PranK and Blitz. We bring in both used and new parts from Japan in small shipments every month or two. Currently, we concentrate on wheels, but are looking at light tune parts as well into the new year.

We are based in Sydney and are happy to freight Australia wide. If you have any questions please don't hesitate to send an email/PM our way.

(Post will be moved to trader section in due course)

To start with...

Work Meister S1 2 piece (5 x 114.3)

F: 18 x 8.5 +33

R: 18 x 9.5 + 35

Black centres - Chrome outers

Very good condition

http://img109.exs.cx/my.php?loc=img109&ima..._meister_s1.jpg

$2,400

Kind Regards,

Jeff.

Link to comment
https://www.sau.com.au/forums/topic/57243-new-sponsor-fs-work-meister-s1/
Share on other sites

Jeff, can you supply 18 x 9.5 all round?

In GTR offset? Brand new yes, but of course it will be quite expensive. Used, it is possible, but depends on if they can be located or not.

At the moment I am not sourcing wheels (and other parts) to order, but I am looking to do this into the new year. I will announce when this will begin...

interested in some Clublinea or SSR Professors or Gram Light Pro's around 18x9.5-10 front 18x12 rear with crazy dished offset

- adz

As above

thats a good price that how much i got mine for but with tyres

Nice. Any pics?

Thank You for the large amount of interest so far. Some more of our wheels that are available immediately will be put up shortly...

And by the way, these are still for sale!

Kind Regards,

Jeff.

[Do you, or will you be sourcing 2nd hand rims? I am after a set of Work Equip chrome in 18" (or similar) to suit an R33 GT-R

As mentioned, I am not sourcing wheels/parts individually at the moment.

However, I am looking to do this early next year - once I begin I will let everyone know.

Kind Regards,

Jeff.

As you would have seen it this pic

http://img33.exs.cx/my.php?loc=img33ℑ=62-S1_4.jpg

there were a few curb marks (although this was the worst of it) on both the front (8.5") wheels - these were put in for repair on Saturday and will be ready this coming Saturday.

If the wheels are not sold by Friday night they will go on my car!

Pics will be put up to show what you missed out on!

Kind Regards,

Jeff.

  • 3 weeks later...

Although I am sad to see the Work Meister's go, they have gone to a loving home!!!

Loz (head honcho over at www.nissansilvia.com) has picked them up for the sites upcoming project Silvia

Check it out at http://www.nissansilvia.com/features/cars/loz/

This car will be something crazy when complete...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...