Jump to content
SAU Community

Recommended Posts

Guest INASNT

When i got my car serviced, oil, fuel, air filters, oil. plugs regapped to 0.8mm, also got a 2 stage turbosmart boost controller put in.

I have stock, IC, injectors and comp at the moment.

I wanted the boost set at 9 psi low and 14psi high, but i could only put the high setting on 12 psi because it was pinging.

I will be getting a S-AFC soon, so i wanted to know if when i get the S-AFC and get it tuned could i run 14 psi on high boost or whould it still ping coz of the stock IC??

Also whats the setting on their to stop the car stalling coz i got a Blitz Atmo BOV which is a pain in the arse to drive with in heavy traffic.

Also i got 150kw@wheels with 12 psi boost, pod filter and 3inch full exhaust, what can i expect to get with the s-afc tuned?

Link to comment
https://www.sau.com.au/forums/topic/574-s-afc-tuning-question/
Share on other sites

Okay...I'm no mechanic, but there seems to be alot of this at the moment. My guess would be the cold weather coming in, as boost tends to rise a little with cold air. And if you right on 12psi it wouldn't take much to exceed the computers restrictor.

A boost controler would usually be placed inbetween the intake and the wastegate actuator...I mean the line which runs to the boost solnoid which gives the boost signal to the computer (?)... I know mine cough and got upset until I removed the line....it seemed to boost heaps better and went to 13 instead of 12 and coughing.

Again...Don't take this as word of law.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...