Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

do you supply them for a series II R33, what is the differance between the OEM and AERO style????(i dont know to much about body kits), if any one can tell me it'll be greatly appretiated. im very keen about a bonnet but want to know the differances so i can choose which one i want.

do you supply them for a series II R33, what is the differance between the OEM and AERO style????(i dont know to much about body kits), if any one can tell me it'll be greatly appretiated. im very keen about a bonnet but want to know the differances so i can choose which one i want.

the aero style has vents whereas the oem style is like the standard bonnet but made of carbon fibre.

i will be on overseas trip in feb. so the next preorder will be in may or june 2005 ask some are asking.

but yes i will only leave once this shipment has arrived and everything has been taken care of. :(

LATEST UPDATE

This is the latest models that are available for Nissan Skyline

R32 (AERO STYLE)

R33 (AERO STYLE) SERIES 1 ONLY

03 R-34 GTR (AERO STYLE) ** LATEST UPDATE

R32 GTS (HCR-32) OEM STYLE

R32 GTR (BNR-32) AERO STYLE

I DO NOT HAVE ANY OTHER MODEL FOR SKYLINE AT THE MOMENT. I WILL TRY TO HAVE MORE RANGE IN THE FUTURE

BOOKING CLOSE THIS MONDAY (IE, LAST DAY TO PUT A DEPOSIT)

KINDLY MAKE A DEPOSIT TO

Westpac bank,

Account name: JDM CONCEPT

Account number: (BSB) 032157 - (A/C no) 171648.

Amount: AUS$200.00

*** THIS ACCOUNT IS FOR BONNET ONLY. TO MAKE PAYMENT FOR ANY OTHER ITEMS KINDLY ASK ME FIRST ***

AND INDICATE WHO YOU ARE. VERY IMPORTANT. I HAVE LOTS OF $200 DEPOSIT COMING THRU AND I NEED TO KNOW WHO YOU ARE.

Please send an email to [email protected] and kindly give me your

1. Full name

2. Address

3. Contact no.

4. Models you are after.

I will then issue a deposit slip which will be either send by mail or emailed to you.

IF YOU NEED TO SPEAK TO ME PERSONALLY, PM ME, I WILL GIVE YOU MY CONTACT NO. THANKS

i want one.. but xmas is the biggest spend time of the year :( I'll have to wait out for a next batch if you get more sometime next year.

When is the next order???

april or may 2005 as i am going away on overseas trip.

this thread will be locked now.

any interest on the bonnet please pm or email me at [email protected]

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...