Jump to content
SAU Community

Sorry!!

The Dan

By The Dan,
in Queensland

 Share

Recommended Posts

The Dan Grand Master

The Dan

Posted
Posted

This is a bit of a rant so if you don't wanna hear my crap then go back now.

Otherwise here's the story.

I read a thread saying that some people wanted to buy some Bosch 044 high volume fuel pumps. So, me being the good natured person that I am, I go to work the following day and get a price on these things. They give me the price and I return promptly to post the price. I stated to my supplier that they had to be 044's and they confirmed that they were indeed said pump.

I organise the pumps and organise the buyers and today I go to pick them up. They tell me that I cannot have them for the price that they told me because they had made a mistake and quoted me on a different pump. I now have to tell everyone that I can no longer get them at this price and everything has turned to sh1t. Not only this but the price I can have them for is $125 more than they originally quoted.

Why can't we trust people for accurate information anymore?. Here I am thinking that I am doing people a favour and all I do is stuff everyone around coz someone can't get their sh1t right.

I'm sorry to anyone I stuffed around because of this. I thought I was helping.

Next time I'll have to double make sure I'm getting the right info.

Link to comment
https://www.sau.com.au/forums/topic/59181-sorry/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...